Passive Q-switching in an erbium-doped fiber laser using tungsten sulphoselenide as a saturable absorber

A highly stable Q-switched laser incorporating a mechanically exfoliated tungsten sulphoselenide (WSSe) thin sheet saturable absorber (SA) is proposed and demonstrated. The SA assembly, formed by sandwiching a thin WSSe sheet between two fiber ferrules within the erbium-doped fiber laser, is used to...

全面介紹

Saved in:
書目詳細資料
Main Authors: Ahmad, Harith, Tiu, Zian Cheak, Ooi, Shok Ing
格式: Article
出版: Chinese Laser Press 2018
主題:
在線閱讀:http://eprints.um.edu.my/22659/
https://doi.org/10.3788/COL201816.020009
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
實物特徵
總結:A highly stable Q-switched laser incorporating a mechanically exfoliated tungsten sulphoselenide (WSSe) thin sheet saturable absorber (SA) is proposed and demonstrated. The SA assembly, formed by sandwiching a thin WSSe sheet between two fiber ferrules within the erbium-doped fiber laser, is used to effectively modulate the laser cavity losses. The WSSe-based SA has a saturation intensity of ~0.006 MW/cm2 and a modulation depth of 7.8%, giving an optimum Q-switched laser output with a maximum repetition rate of 61.81 kHz and a minimum pulse width of 2.6 μs. The laser's highest output power of 0.45 mW and highest pulse energy of 7.31 nJ are achieved at the maximum pump power of 280.5 mW. The tunability of the cavity's output at the maximum pump power is analyzed with a C-band tunable bandpass filter, giving a broad tunable range of ∼40 nm, from 1530 nm to 1570 nm. The output performance of the tunable Q-switched laser correlates well with the gain spectrum of erbium-doped fibers, with the shift in the gain profile as a result of the saturated SA.