Analysis of arrester energy for 132kV overhead transmission line due to back flashover and shielding failure

This paper presents the analysis of lightning arrester energy due to back flashover and shielding failure phenomena in a 132kV transmission line in Malaysia. The transmission line, towers and surge arresters were modeled using PSCAD/EMTDC software. The model has been used to simulate the discharged...

全面介紹

Saved in:
書目詳細資料
Main Authors: Hassan, Nor Hidayah Nor, Bakar, Ab Halim Abu, Mokhlis, Hazlie, Illias, Hazlee Azil
格式: Conference or Workshop Item
語言:English
出版: 2012
主題:
在線閱讀:http://eprints.um.edu.my/7851/1/Analysis_of_arrester_energy_for_132kV_overhead_transmission_line_due_to_back_flashover_and_shielding_failure.pdf
http://eprints.um.edu.my/7851/
http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6450302
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
實物特徵
總結:This paper presents the analysis of lightning arrester energy due to back flashover and shielding failure phenomena in a 132kV transmission line in Malaysia. The transmission line, towers and surge arresters were modeled using PSCAD/EMTDC software. The model has been used to simulate the discharged energy from lightning arresters that were installed on the tower in the event of back flashover and shielding failure. The arrester was modeled based on the IEEE frequency dependent model. Comparison between the simulation results and values calculated theoretically was performed to validate the model that has been developed. The results show that both are in reasonable agreement with each other. The maximum calculated and simulated energy discharged by the arrester is found to be less than 5.1 kJ/kV, which is the rating of arresters installed in the actual 132kV transmission lines.