Analysis of arrester energy for 132kV overhead transmission line due to back flashover and shielding failure
This paper presents the analysis of lightning arrester energy due to back flashover and shielding failure phenomena in a 132kV transmission line in Malaysia. The transmission line, towers and surge arresters were modeled using PSCAD/EMTDC software. The model has been used to simulate the discharged...
Saved in:
Main Authors: | , , , |
---|---|
Format: | Conference or Workshop Item |
Language: | English |
Published: |
2012
|
Subjects: | |
Online Access: | http://eprints.um.edu.my/7851/1/Analysis_of_arrester_energy_for_132kV_overhead_transmission_line_due_to_back_flashover_and_shielding_failure.pdf http://eprints.um.edu.my/7851/ http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6450302 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Institution: | Universiti Malaya |
Language: | English |
id |
my.um.eprints.7851 |
---|---|
record_format |
eprints |
spelling |
my.um.eprints.78512019-12-06T08:32:07Z http://eprints.um.edu.my/7851/ Analysis of arrester energy for 132kV overhead transmission line due to back flashover and shielding failure Hassan, Nor Hidayah Nor Bakar, Ab Halim Abu Mokhlis, Hazlie Illias, Hazlee Azil TA Engineering (General). Civil engineering (General) TK Electrical engineering. Electronics Nuclear engineering This paper presents the analysis of lightning arrester energy due to back flashover and shielding failure phenomena in a 132kV transmission line in Malaysia. The transmission line, towers and surge arresters were modeled using PSCAD/EMTDC software. The model has been used to simulate the discharged energy from lightning arresters that were installed on the tower in the event of back flashover and shielding failure. The arrester was modeled based on the IEEE frequency dependent model. Comparison between the simulation results and values calculated theoretically was performed to validate the model that has been developed. The results show that both are in reasonable agreement with each other. The maximum calculated and simulated energy discharged by the arrester is found to be less than 5.1 kJ/kV, which is the rating of arresters installed in the actual 132kV transmission lines. 2012 Conference or Workshop Item PeerReviewed application/pdf en http://eprints.um.edu.my/7851/1/Analysis_of_arrester_energy_for_132kV_overhead_transmission_line_due_to_back_flashover_and_shielding_failure.pdf Hassan, Nor Hidayah Nor and Bakar, Ab Halim Abu and Mokhlis, Hazlie and Illias, Hazlee Azil (2012) Analysis of arrester energy for 132kV overhead transmission line due to back flashover and shielding failure. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2012, Kota Kinabalu. http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6450302 |
institution |
Universiti Malaya |
building |
UM Library |
collection |
Institutional Repository |
continent |
Asia |
country |
Malaysia |
content_provider |
Universiti Malaya |
content_source |
UM Research Repository |
url_provider |
http://eprints.um.edu.my/ |
language |
English |
topic |
TA Engineering (General). Civil engineering (General) TK Electrical engineering. Electronics Nuclear engineering |
spellingShingle |
TA Engineering (General). Civil engineering (General) TK Electrical engineering. Electronics Nuclear engineering Hassan, Nor Hidayah Nor Bakar, Ab Halim Abu Mokhlis, Hazlie Illias, Hazlee Azil Analysis of arrester energy for 132kV overhead transmission line due to back flashover and shielding failure |
description |
This paper presents the analysis of lightning arrester energy due to back flashover and shielding failure phenomena in a 132kV transmission line in Malaysia. The transmission line, towers and surge arresters were modeled using PSCAD/EMTDC software. The model has been used to simulate the discharged energy from lightning arresters that were installed on the tower in the event of back flashover and shielding failure. The arrester was modeled based on the IEEE frequency dependent model. Comparison between the simulation results and values calculated theoretically was performed to validate the model that has been developed. The results show that both are in reasonable agreement with each other. The maximum calculated and simulated energy discharged by the arrester is found to be less than 5.1 kJ/kV, which is the rating of arresters installed in the actual 132kV transmission lines. |
format |
Conference or Workshop Item |
author |
Hassan, Nor Hidayah Nor Bakar, Ab Halim Abu Mokhlis, Hazlie Illias, Hazlee Azil |
author_facet |
Hassan, Nor Hidayah Nor Bakar, Ab Halim Abu Mokhlis, Hazlie Illias, Hazlee Azil |
author_sort |
Hassan, Nor Hidayah Nor |
title |
Analysis of arrester energy for 132kV overhead transmission line due to back flashover and shielding failure |
title_short |
Analysis of arrester energy for 132kV overhead transmission line due to back flashover and shielding failure |
title_full |
Analysis of arrester energy for 132kV overhead transmission line due to back flashover and shielding failure |
title_fullStr |
Analysis of arrester energy for 132kV overhead transmission line due to back flashover and shielding failure |
title_full_unstemmed |
Analysis of arrester energy for 132kV overhead transmission line due to back flashover and shielding failure |
title_sort |
analysis of arrester energy for 132kv overhead transmission line due to back flashover and shielding failure |
publishDate |
2012 |
url |
http://eprints.um.edu.my/7851/1/Analysis_of_arrester_energy_for_132kV_overhead_transmission_line_due_to_back_flashover_and_shielding_failure.pdf http://eprints.um.edu.my/7851/ http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6450302 |
_version_ |
1654960628788363264 |