Leak Detection in Pipeline Using Wavelet and Ceptrum Analysis
Piping system is one of the important features in either home of industrial user. It is essential for transporting fluid from a point to another point. For example, for home user, piping systems functioning as carrier for the water from the damp to every home. Whereas, for industrial user, the fluid...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
AENSI Journals
2014
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/19814/1/AJBAS_2014_352-355_makeen.pdf http://umpir.ump.edu.my/id/eprint/19814/ http://www.ajbasweb.com/old/ajbas/2014/Special%2010/352-355.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Malaysia Pahang |
| Language: | English |
| Summary: | Piping system is one of the important features in either home of industrial user. It is essential for transporting fluid from a point to another point. For example, for home user, piping systems functioning as carrier for the water from the damp to every home. Whereas, for industrial user, the fluid that is carried are from
different type such as water, gas, oil and many more. But due to many reasons, leaks may occur in the pipelines. This paper is focusing on the leakage detection in the
pipelines using wavelet on cepstrum analysis. The basic principle is the fact that water spouting out of a leak in a pressurized pipe generates signal, and this signal contains information to whether a leak exists and where it is located. The present transient methods for finding leaks are mainly based upon correlation analysis, where one sensing device is installed at each side of a leak. This method is hard to operate because it needs a lot of operators to operate it due to equipment in different place. To overcome this limitation a pressure transducer is used as the sensing device and ceptrum analysis
to show the data obtained. |
|---|