Investigation of wear performance of friction stir processed aluminium metal matrix composites

In this work the reference materials used were AA6061 Al alloy. Hence, the wear performance was to be improved by introducing friction stir processing (FSP) aluminium alloy AA6061. Furthermore, FSPed AA6061 was reinforced by rice husk ash (RHA) of 6% volume fraction. The FSP fabrication parameters u...

全面介紹

Saved in:
書目詳細資料
Main Authors: Che Dini Marini, Che Mohammad Ishkandar El-Rahimin, Fatchurrohman, Nanang, Zuhairah, Zulkfli
格式: Conference or Workshop Item
語言:English
English
出版: Elsevier Ltd 2020
主題:
在線閱讀:http://umpir.ump.edu.my/id/eprint/35611/1/Investigation%20of%20wear%20performance%20of%20friction%20stir%20processed%20aluminium%20metal%20matrix%20composites.pdf
http://umpir.ump.edu.my/id/eprint/35611/2/Investigation%20of%20wear%20performance%20of%20friction%20stir%20processed%20aluminium%20metal%20matrix%20composites_Abs.pdf
http://umpir.ump.edu.my/id/eprint/35611/
https://doi.org/10.1016/j.matpr.2020.07.568
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
機構: Universiti Malaysia Pahang Al-Sultan Abdullah
語言: English
English
實物特徵
總結:In this work the reference materials used were AA6061 Al alloy. Hence, the wear performance was to be improved by introducing friction stir processing (FSP) aluminium alloy AA6061. Furthermore, FSPed AA6061 was reinforced by rice husk ash (RHA) of 6% volume fraction. The FSP fabrication parameters used were rotation speeds at 1000rpm, 1400rpm and 1600rpm with a constant traversed speed of 25mm/min. Pin-on-disc tribometer was used to investigate the wear properties. The mass loss and specimen materials' wear rate were the final outcomes. It was found that wear properties had improved for FSPed AA6061/6vol% RHA compared to FSPed AA6061 followed by AA6061. The best result was achieved by FSPed AA6061/6vol% RHA fabricated at 1600rpm and 25mm/min, the mass loss was 0.02 g and the rate of wear is 0.97×10-3 mm3/Nm.