Thermal progress of a non-Newtonian hybrid nanofluid flow on a permeable Riga plate with temporal stability analysis

• Main Authors: Najiyah Safwa, Khasi’ie, Iskandar, Waini, Abdul Rahman, Mohd Kasim, Nurul Amira, Zainal, Norihan, Md Arifin, Ioan, Pop
• Format: Article
• Language: English; English
• Published: Physical Society of the Republic of China 2022
• Subjects: QA Mathematics; QC Physics
• Online Access: http://umpir.ump.edu.my/id/eprint/38404/1/13%20Thermal%20progress%20of%20a%20non.pdf; http://umpir.ump.edu.my/id/eprint/38404/2/Thermal%20progress%20of%20a%20non-Newtonian%20hybrid%20nanofluid%20flow%20on%20a%20permeable%20Riga%20plate%20with%20temporal%20stability%20analysis.pdf; http://umpir.ump.edu.my/id/eprint/38404/; https://doi.org/10.1016/j.cjph.2022.03.019
• Institution: Universiti Malaysia Pahang

Flow and heat transfer phenomena involving hybrid nanofluids has been used in a variety of technological and commercial applications. Thus, the flow behavior with thermal progress of a second grade hybrid Cu-Al2O3/CH3OH nanofluid towards a permeable Riga/EMHD plate is investigated. The governing model is reduced to a set of ordinary differential equations, which are then solved in Matlab software using the bvp4c application. The solutions for the skin friction coefficient and the local Nusselt number have been established and discussed. Two solutions are available when the parameters are employed within the ranges of 0.007≤K≤0.009, 0.05≤Z≤0.2, 0.1≤A≤0.3 and 0.01≤φhnf≤0.03,while the suction parameter and Prandtl number is fixed at S=2 and Pr=7.38 (CH3OH). However, only the first solution is validated as the real physical solution based on the positive smallest eigenvalue from the stability analysis. The use of hybrid nanoparticles in combination with the suction effect has been exposed to have a role in the thermal growth of this non-Newtonian working fluid. The addition of volumetric concentration of hybrid nanoparticles extends the critical value approximately 1.4-1.6% such that λc=−3.03383(φhnf=0.01), λc=−3.08119(φhnf=0.02) and λc=−3.12497(φhnf=0.03). Meanwhile, only second grade parameter has a significantly negative impact on the thermal performance.