Multilayered membrane spacer: does it enhance solution mixing?

• Main Authors: Al-Amshawee, Sajjad Khudhur Abbas, Mohd Yusri, Mohd Yunus, Habib Dakhil, Ihsan
• Format: Article
• Language: English; English
• Published: Society of Chemical Industry 2023
• Subjects: Q Science (General); T Technology (General); TP Chemical technology
• Online Access: http://umpir.ump.edu.my/id/eprint/41792/1/jctb.7344%202.pdf; http://umpir.ump.edu.my/id/eprint/41792/7/Multilayered%20membrane%20spacer.pdf; http://umpir.ump.edu.my/id/eprint/41792/; https://doi.org/10.1002/jctb.7344; http://doi.org/10.1002/jctb.7344
• Institution: Universiti Malaysia Pahang Al-Sultan Abdullah

The present review systematically investigates and illustrates the effect of multilayered membrane spacers on the features of fluid dynamics that influence all performance metrics. Multilayer spacers are frequently composed of three sets of filaments (i.e., top, middle, and bottom layers), which has the benefit of increasing mass transfer and decreasing membrane surface fouling when compared to ordinary monolayer (e.g., extruded spacer) and two-layer spacers. The review found that the multilayer spacer's middle layer disperses primary flow to the thin side spacers placed near the membrane's surfaces. The thin side spacers will then form narrow passageways to keep the solution in situ for as long as mass transfer is achievable. The employment of thin spacers close to the membranes at satisfactory operational conditions (e.g., adequate flow velocity) results in swirling flows and incorporation of transverse and longitudinal eddies near to the membranes, reducing the boundary layer's width and making the associated ion concentration domain at the membranes much more consistent. The concept and implementation of multilayer geometry in feed channels appears to be promising, since a multilayered spacer can function at a lower maximum flow velocity than normal two-layer spacers, saving operational energy while minimizing concentration gradients at the membrane surfaces. Furthermore, the multilayer structure's durability and mechanical strength may help to reduce membrane deformation and maintain long processes. Future studies might look at significantly reducing spacer thickness for industrial uses.