Catalytic Pyrolysis of Palm Oil Decanter Cake using CaO and γ-Al2O3 in Vacuum Fixed Bed Reactor to Produce Bio-oil
The objective of this paper is to present the influence of catalyst towards the properties of bio-oil produced from Palm oil decanter cake (PDC), a semi-solid waste from palm oil milling plant. The PDC was first dried in oven at 105 °C for 24 hours to remove moisture and then ground to particle si...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Conference or Workshop Item |
| Language: | English |
| Published: |
2013
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/8859/1/Catalytic%20pyrolysis%20of%20palm%20oil%20decanter%20cake%20using%20CaO%20and%20%CE%B3-Al2O3%20in%20vacuum%20fixed%20bed%20reactor%20to%20produce%20bio-oil.pdf http://umpir.ump.edu.my/id/eprint/8859/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Malaysia Pahang |
| Language: | English |
| Summary: | The objective of this paper is to present the influence of catalyst towards the properties of bio-oil produced from
Palm oil decanter cake (PDC), a semi-solid waste from palm oil milling plant. The PDC was first dried in oven
at 105 °C for 24 hours to remove moisture and then ground to particle size of 0.85 – 2 mm. The dried PDC was
then pyrolysed under dynamic vacuum at 500 °C, with temperature increased at 15 °C/min and maintained at the
final temperature until no more product were formed. Two catalysts, the basic CaO and acidic γ-Al2O3 were
used. The catalyst was mixed with decanter cake at various sample to catalyst weight ratio to investigate the
effect of catalyst amount towards bio-oil production. In-terms of bio-oil yield and its HHV value, CaO
performed better than γ-Al2O3. It is also found that 5 wt% of calcium oxide to sample produced the highest yield
on bio-oil production. The oil was also characterized using 1H-NMR, FTIR, CHNS analyzer and GC-MS. The
analyses show that bio-oil obtained through catalytic pyrolysis of PDC is slightly different from that produced
via non-catalytic process. GC/MS data indicates that the addition of calcium oxide reduced the content of
carboxylic acid in bio-oil significantly. In addition, the bio oil produced from PDC has near neutral acidity , with
pH value of 6.38, 6 and 8 for non catalytic, γ-Al2O3 and CaO catalytic pyrolysis, respectively. It can be deduced
from this study that CaO can be used to enhance the production of bio-oil from decanter cake.
|
|---|