Extraction and characterization of γ-alumina from waste aluminium dross
Aluminium (Al) dross, a chemical waste from an aluminium production factory in Malaysia, was used in this study for the recovery of aluminium in the form of γ-Al2O3. The different methods, such as acid leaching, alkaline precipitation at different pH and calcination steps were successfully applied...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Springer Netherlands
2016
|
| Subjects: | |
| Online Access: | https://eprints.ums.edu.my/id/eprint/15106/1/Extraction_and_characterization_of_%C3%8E%C2%B3.pdf https://eprints.ums.edu.my/id/eprint/15106/ http://dx.doi.org/10.1007/s12649-016-9591-4 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Malaysia Sabah |
| Language: | English |
| Summary: | Aluminium (Al) dross, a chemical waste from an aluminium production factory in Malaysia, was used in this study for the recovery of aluminium in the form of γ-Al2O3. The different methods, such as acid leaching, alkaline precipitation at different pH and calcination steps were successfully applied to extract the γ-Al2O3 from Al dross. The products were characterized by X-ray diffraction, atomic absorption spectroscopy, X-ray fluorescence, thermogravimetric analysis, Brunauer–Emmett–Teller surface area analysis, particle size distribution and field emission scanning electron microscope. The results revealed that the γ-Al2O3 powders recovered from the Al dross has crystallite size around 5 nm, specific surface area between 111 and 128 m2/gwith different pore sizes. Thus, the present study illustrates an adequate utilization of the Al dross, which is, to date, neither adequately utilized nor properly dispensed in most of the developing countries. |
|---|