Tensile and physical properties of linear low-density polyethylene-natural rubber composite: comparison between size and filler types

• Main Authors: Yanuar Z. Arief, Mohamad Zul Hilmey Makmud, Sahari Japar, Siti Junian, Mat Uzir Wahit
• Format: Article
• Language: English; English
• Published: Materials and Energy Research Center 2016
• Subjects: Q1-390 Science (General); T1-995 Technology (General)
• Online Access: https://eprints.ums.edu.my/id/eprint/41560/1/ABSTRACT.pdf; https://eprints.ums.edu.my/id/eprint/41560/2/FULL%20TEXT.pdf; https://eprints.ums.edu.my/id/eprint/41560/; https://doi.org/10.5829/idosi.ije.2016.29.09c.11
• Institution: Universiti Malaysia Sabah

Linear Low-Density Polyethylene-Natural Rubber (LLDPE-NR) composites in the ratio of 70:20 were made with different loadings of nanosilica and micro-scale Palm Oil Fuel Ash (POFA). Linear Low-Density Polyethylene grafted with maleic anhydride (LLDPE-g-MAH) of 10 wt% was added as a compatibiliser. The composites were produced by using two-roll mill machine. The tensile properties of the composites were determined by carrying out tensile test. From the test, it was found that the tensile strength of LLDPE-NR decreased with increasing weight percentages of POFA in the composition. Tensile strength of LLDPE-NR increased with increasing nanosilica content of the composition. The water absorption test was done on all samples, and it was found that water absorption of LLDPE-NR nanocomposites decreased with increasing nanosilica content. However, water absorption of LLDPE-NR microcomposites increased with increasing POFA content.