Bearing puller design
Access is limited to UniMAP community.
Saved in:
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Learning Object |
| Language: | English |
| Published: |
Universiti Malaysia Perlis
2012
|
| Subjects: | |
| Online Access: | http://dspace.unimap.edu.my/xmlui/handle/123456789/21346 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Malaysia Perlis |
| Language: | English |
| id |
my.unimap-21346 |
|---|---|
| record_format |
dspace |
| spelling |
my.unimap-213462012-10-12T14:07:23Z Bearing puller design Pubalan, Nadaraja Prof. Dr. Kyaw Sein Bearing puller Clamp Mechanical design Ball bearings Access is limited to UniMAP community. The focus of this project is to design a bearing puller of specific application. This project was assigned to design a bearing puller, a device for removing bearings, gears and countless other press fitted parts from motor vehicles and machines such as ball bearings. The device includes an elongated hollow housing to telescope over a bearing shaft on which the bearing is seated. An outer collar and inner collar are attached to the housing. Clamp means grip the inner collar and the bearing assembly to cause the bearing to be pulled from its seat when pressure is applied to the shaft. The removal of ball bearings assembled with interference between the inner race and shaft. During removal of bearings from the shaft, the bearings condition and shaft’s surface smoothness will be considered as not to make the surface dented. The adjustability of bearing puller will enable usage in single row radial types bearings having outside diameters ranging from 80 to 130mm. The bore diameters range from 40 to 55mm. The design of bearing puller is designed in software Solidworks and simulated software Cosmos. This designed bearing puller will be able to dismantle the bearing that fixed with interference of 0.04mm for tightest fit that is being used. For desired tightest fit that desired, the maximum radial pressure between the inner race and the shaft is 20kN/mm². Finally, a number of recommendations are put forward at the end of this report as further development that could be taken in this project. 2012-10-12T14:07:23Z 2012-10-12T14:07:23Z 2009-04 Learning Object http://hdl.handle.net/123456789/21346 en Universiti Malaysia Perlis School of Mechatronic Engineering |
| institution |
Universiti Malaysia Perlis |
| building |
UniMAP Library |
| collection |
Institutional Repository |
| continent |
Asia |
| country |
Malaysia |
| content_provider |
Universiti Malaysia Perlis |
| content_source |
UniMAP Library Digital Repository |
| url_provider |
http://dspace.unimap.edu.my/ |
| language |
English |
| topic |
Bearing puller Clamp Mechanical design Ball bearings |
| spellingShingle |
Bearing puller Clamp Mechanical design Ball bearings Pubalan, Nadaraja Bearing puller design |
| description |
Access is limited to UniMAP community. |
| author2 |
Prof. Dr. Kyaw Sein |
| author_facet |
Prof. Dr. Kyaw Sein Pubalan, Nadaraja |
| format |
Learning Object |
| author |
Pubalan, Nadaraja |
| author_sort |
Pubalan, Nadaraja |
| title |
Bearing puller design |
| title_short |
Bearing puller design |
| title_full |
Bearing puller design |
| title_fullStr |
Bearing puller design |
| title_full_unstemmed |
Bearing puller design |
| title_sort |
bearing puller design |
| publisher |
Universiti Malaysia Perlis |
| publishDate |
2012 |
| url |
http://dspace.unimap.edu.my/xmlui/handle/123456789/21346 |
| _version_ |
1643791126139764736 |