Using additive manufactured tooling in the fabrication of poly (L-lactide-co-glycolide) implants
Link to publisher's homepage at http://www.crcpress.com/
Saved in:
| Main Authors: | , , |
|---|---|
| Other Authors: | |
| Format: | Working Paper |
| Language: | English |
| Published: |
Taylor & Francis Group, London.
2014
|
| Subjects: | |
| Online Access: | http://dspace.unimap.edu.my:80/dspace/handle/123456789/32078 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Malaysia Perlis |
| Language: | English |
| id |
my.unimap-32078 |
|---|---|
| record_format |
dspace |
| spelling |
my.unimap-320782014-02-21T07:59:58Z Using additive manufactured tooling in the fabrication of poly (L-lactide-co-glycolide) implants Shah Fenner Khan, Mohamad Khan Dalgarno, Kenneth W. German, Matthew J. shahfener@unimap.edu.my Fabrication Bone structure Poly (L-lactide-co-glycolide) (PLGA) Geometrical shapes Tissue restoration Link to publisher's homepage at http://www.crcpress.com/ Rectification of defective bone structures due to trauma or deformation has benefited from the introduction of mostly rigid metal prostheses. However, the high stiffness of metal implants can cause stress shielding in bone restoration. In addition a second operation is required for the removal of the metal implants, screws, plates, and rods once the bone has healed. This paper discusses an adaptable solution where a customised implant is defined which is secured by adhesion and resorbable to enable tissue restoration without a second operation. This paper describes research on methods of creating customised structures from poly (L-lactide-co-glycolide) (PLGA). An existing 3D mandible model in stereolithography file format was used as the basis for this research which a rapid tooling approach is used to create a mould for sintering PLGA particles. The tooling was developed through a stl file of a mandible being imported into a NURBS-based CAD modeller. The modeller was used to create a 3D solid patch model for use as an implantable fracture fixation component. Based on the 3D patch, the tooling was designed and then fabricated by using Stereolitography. Granules of PLGA were placed inside the mould and heated under low pressure to produce the scaffolds with three different formulation of PLGA used in this study. Consolidation of the PLGA occurred under constant pressure with a sintering temperature of 73°C for 2.5hours. Mechanical testing was performed on samples and the results were comparable with conventional processing of PLGA. The geometrical shape of the fabricated PLGA implant resembles the desired fixation component and fits accurately to the fracture site. This work demonstrates that this approach is a viable route in fabricating customised PLGA structures for orthopaedic surgery. 2014-02-21T07:58:51Z 2014-02-21T07:58:51Z 2011-09-28 Working Paper p. 437-441 978-041568418-7 http://www.crcnetbase.com/doi/abs/10.1201/b11341-70 http://dspace.unimap.edu.my:80/dspace/handle/123456789/32078 en Proceedings of the 5th International Conference on Advanced Research and Rapid Prototyping; Taylor & Francis Group, London. |
| institution |
Universiti Malaysia Perlis |
| building |
UniMAP Library |
| collection |
Institutional Repository |
| continent |
Asia |
| country |
Malaysia |
| content_provider |
Universiti Malaysia Perlis |
| content_source |
UniMAP Library Digital Repository |
| url_provider |
http://dspace.unimap.edu.my/ |
| language |
English |
| topic |
Fabrication Bone structure Poly (L-lactide-co-glycolide) (PLGA) Geometrical shapes Tissue restoration |
| spellingShingle |
Fabrication Bone structure Poly (L-lactide-co-glycolide) (PLGA) Geometrical shapes Tissue restoration Shah Fenner Khan, Mohamad Khan Dalgarno, Kenneth W. German, Matthew J. Using additive manufactured tooling in the fabrication of poly (L-lactide-co-glycolide) implants |
| description |
Link to publisher's homepage at http://www.crcpress.com/ |
| author2 |
shahfener@unimap.edu.my |
| author_facet |
shahfener@unimap.edu.my Shah Fenner Khan, Mohamad Khan Dalgarno, Kenneth W. German, Matthew J. |
| format |
Working Paper |
| author |
Shah Fenner Khan, Mohamad Khan Dalgarno, Kenneth W. German, Matthew J. |
| author_sort |
Shah Fenner Khan, Mohamad Khan |
| title |
Using additive manufactured tooling in the fabrication of poly (L-lactide-co-glycolide) implants |
| title_short |
Using additive manufactured tooling in the fabrication of poly (L-lactide-co-glycolide) implants |
| title_full |
Using additive manufactured tooling in the fabrication of poly (L-lactide-co-glycolide) implants |
| title_fullStr |
Using additive manufactured tooling in the fabrication of poly (L-lactide-co-glycolide) implants |
| title_full_unstemmed |
Using additive manufactured tooling in the fabrication of poly (L-lactide-co-glycolide) implants |
| title_sort |
using additive manufactured tooling in the fabrication of poly (l-lactide-co-glycolide) implants |
| publisher |
Taylor & Francis Group, London. |
| publishDate |
2014 |
| url |
http://dspace.unimap.edu.my:80/dspace/handle/123456789/32078 |
| _version_ |
1643796766238179328 |