Impact of CdTe thin film thickness in ZnxCd1−xS/CdTe solar cell by RF sputtering

• Main Authors: Hossain, M.S., Rahman, K.S., Karim, M.R., Aijaz, M.O., Dar, M.A., Shar, M.A., Misran, H., Amin, N.
• Format: Article
• Published: 2020
• Institution: Universiti Tenaga Nasional

This paper presents the impact of thickness of RF sputtered CdTe thin film as an absorber layer through structural and optical characterization in ZnxCd1−xS/CdTe solar cells at lower concentration of zinc (Zn). The crystallographic, morphological and optical properties of CdTe thin film fabricated on top of bare soda-lime glass were elucidated by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and ultraviolet (UV) spectrophotometer. XRD spectra shows that crystallinity increases in thicker samples and the CdTe (1 1 1) diffraction peak intensity centered at 23.825° increases with the increase of film thickness confirming the zinc blend structure of CdTe thin film. The window layer ZnxCd1−xS was fabricated with optimum deposition conditions by co-sputtering of ZnS and CdS. The complete cell was fabricated by RF magnetron sputtering with the cell configuration of glass/FTO/ZnxCd1−xS/ZnTe/Ag. With the increasing thicknesses of CdTe the cell efficiency increases with the highest efficiency of 8.79% for 3.5 μm of CdTe. This paves the way of novel window of ZnCdTe for smoothening the junction mismatches in hetero-junction CdTe thin film solar cells. © 2019 Elsevier Ltd