Power system stabilizer optimization using BBO algorithm for a better damping of rotor oscillations owing to small disturbances
In a practical power system, the synchronous generators should cope with changes in both real and reactive power demand. In general, stabilization of real power variations is possible by rescheduling the operation of generators. To control the demand of the reactive power load, electric limits of th...
Saved in:
Main Authors: | , , , |
---|---|
Other Authors: | |
Format: | Article |
Published: |
Belgrade University
2023
|
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Institution: | Universiti Tenaga Nasional |
Summary: | In a practical power system, the synchronous generators should cope with changes in both real and reactive power demand. In general, stabilization of real power variations is possible by rescheduling the operation of generators. To control the demand of the reactive power load, electric limits of the excitation loop is adjusted to initiate the reactive power of the network. In order to accelerate the reactive power delivery, a power system stabilizer (PSS) is connected to the generator through an exciter. We introduce here a latest biogeography-based optimization (BBO) algorithm to adjust PSS parameters for different operating conditions in order to improve the stability margin and the system damping. This is possible when the integral square error (ISE), which is the objective function, of the speed deviation in asynchronous machine intended to a range of turbulence is reduced. A relative comparative study is conducted between the algorithms such as BBO, particle swarm optimization (PSO) and the adaptation law based PSS on SMIB. The simulation results indicate that when compared to other available methods, the BBO algorithm damps out low-frequency oscillations in the synchronous machine rotor in an effective manner. Algorithms are simulated with the help of MATLAB�and Simulink�. Results obtained from simulations indicate that the recommended algorithm yields rapid convergence rate and improved dynamic performance; system stability, efficiency, dynamism and reliability are also improved. � Faculty of Mechanical Engineering, Belgrade. |
---|