Investigation on classification efficiency for coal-fired power plant classifiers using a numerical approach
Incomplete combustion in boilers often leads to a significant presence of unburnt carbon found in the ash and pollutant emissions. A key factor to overcome this problem is to increase the quality of classification via achieving a greater particle separation quality where at least 70% of the coal par...
Saved in:
| Main Authors: | , , |
|---|---|
| Other Authors: | |
| Format: | Article |
| Published: |
Taylor's University
2023
|
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Tenaga Nasional |
| Summary: | Incomplete combustion in boilers often leads to a significant presence of unburnt carbon found in the ash and pollutant emissions. A key factor to overcome this problem is to increase the quality of classification via achieving a greater particle separation quality where at least 70% of the coal particles exiting the classifier are smaller than 75 ?m. Three dimensional (3-D) computational fluid dynamics modelling was used to investigate the effect of the steepness of the classifier blade angle on the classification efficiency in Coal-Fired power plants. The gas flow inside the coal mill was solved by the realizable k-? turbulence model (RKE) with a detailed 3-D classifier geometry meanwhile the discrete phase model was used to solve the coal particles flow. The steepest classifier blade angle of 40� achieved the highest quality of classification where 61.70% of the coal particles are less than 75 ?m. Meanwhile, the classification efficiency dipped to 93.0%. An increase in quality of classification leads to a decrease in classification efficiency. � School of Engineering, Taylor's University. |
|---|