A low power and low ripple CMOS high voltage generator for RFID transponder EEPROM
Article; controlled study; direct current; electric potential; energy; radiofrequency identification; simulation; software; electricity; equipment design; power supply; procedures; radio frequency identification device; radiofrequency radiation; software; transistor; Electric Power Supplies; Electri...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Other Authors: | |
| Format: | Article |
| Published: |
Public Library of Science
2023
|
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Tenaga Nasional |
| id |
my.uniten.dspace-25584 |
|---|---|
| record_format |
dspace |
| spelling |
my.uniten.dspace-255842023-05-29T16:11:16Z A low power and low ripple CMOS high voltage generator for RFID transponder EEPROM Rahman L.F. Marufuzzaman M. Alam L. Sidek L.M. Reaz M.B.I. 36984229900 57205234835 37053462100 35070506500 6602752147 Article; controlled study; direct current; electric potential; energy; radiofrequency identification; simulation; software; electricity; equipment design; power supply; procedures; radio frequency identification device; radiofrequency radiation; software; transistor; Electric Power Supplies; Electricity; Equipment Design; Radio Frequency Identification Device; Radio Waves; Software; Transistors, Electronic A high-voltage generator (HVG) is an essential part of a radio frequency identification electrically erasable programmable read-only memory (RFID-EEPROM). An HVG circuit is used to generate a regulated output voltage that is higher than the power supply voltage. However, the performance of the HVG is affected owing to the high-power dissipation, high-ripple voltage and low-pumping efficiency. Therefore, a regulator circuit consists of a voltage divider, comparator and a voltage reference, which are respectively required to reduce the ripple voltage, increase pumping efficiency and decrease the power dissipation of the HVG. Conversely, a clock driving circuit consists of the current-starved ring oscillator (CSRO), and the non- overlapping clock generator is required to drive the clock signals of the HVG circuit. In this study, the Mentor Graphics EldoSpice software package is used to design and simulate the HVG circuitry. The results showed that the designed CSRO dissipated only 4.9 ?W at 10.2 MHz and that the phase noise was only -119.38 dBc/Hz at 1 MHz. Moreover, the proposed charge pump circuit was able to generate a maximum VPP of 13.53 V and it dissipated a power of only 31.01 ?W for an input voltage VDD of 1.8 V. After integrating all the HVG modules, the results showed that the regulated HVG circuit was also able to generate a higher VPP of 14.59 V, while the total power dissipated was only 0.12 mW with a chip area of 0.044 mm2. Moreover, the HVG circuit produced a pumping efficiency of 90% and reduced the ripple voltage to <4 mV. Therefore, the integration of all the proposed modules in HVG ensured low-ripple programming voltages, higher pumping efficiency, and EEPROMs with lower power dissipation, and can be extensively used in low-power applications, such as in non-volatile memory, radiofrequency identification transponders, on-chip direct current DC-DC converters. Copyright: � 2020 Rahman et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. Final 2023-05-29T08:11:16Z 2023-05-29T08:11:16Z 2020 Article 10.1371/journal.pone.0225408 2-s2.0-85079040760 https://www.scopus.com/inward/record.uri?eid=2-s2.0-85079040760&doi=10.1371%2fjournal.pone.0225408&partnerID=40&md5=818f14cab5cf6e3561b04da8241f068d https://irepository.uniten.edu.my/handle/123456789/25584 15 2 e0225408 All Open Access, Gold, Green Public Library of Science Scopus |
| institution |
Universiti Tenaga Nasional |
| building |
UNITEN Library |
| collection |
Institutional Repository |
| continent |
Asia |
| country |
Malaysia |
| content_provider |
Universiti Tenaga Nasional |
| content_source |
UNITEN Institutional Repository |
| url_provider |
http://dspace.uniten.edu.my/ |
| description |
Article; controlled study; direct current; electric potential; energy; radiofrequency identification; simulation; software; electricity; equipment design; power supply; procedures; radio frequency identification device; radiofrequency radiation; software; transistor; Electric Power Supplies; Electricity; Equipment Design; Radio Frequency Identification Device; Radio Waves; Software; Transistors, Electronic |
| author2 |
36984229900 |
| author_facet |
36984229900 Rahman L.F. Marufuzzaman M. Alam L. Sidek L.M. Reaz M.B.I. |
| format |
Article |
| author |
Rahman L.F. Marufuzzaman M. Alam L. Sidek L.M. Reaz M.B.I. |
| spellingShingle |
Rahman L.F. Marufuzzaman M. Alam L. Sidek L.M. Reaz M.B.I. A low power and low ripple CMOS high voltage generator for RFID transponder EEPROM |
| author_sort |
Rahman L.F. |
| title |
A low power and low ripple CMOS high voltage generator for RFID transponder EEPROM |
| title_short |
A low power and low ripple CMOS high voltage generator for RFID transponder EEPROM |
| title_full |
A low power and low ripple CMOS high voltage generator for RFID transponder EEPROM |
| title_fullStr |
A low power and low ripple CMOS high voltage generator for RFID transponder EEPROM |
| title_full_unstemmed |
A low power and low ripple CMOS high voltage generator for RFID transponder EEPROM |
| title_sort |
low power and low ripple cmos high voltage generator for rfid transponder eeprom |
| publisher |
Public Library of Science |
| publishDate |
2023 |
| _version_ |
1806427786685972480 |