Ring cavity multiwavelength brillouin-erbium fiber laser with a partially reflective fiber bragg grating

• Main Authors: Johari M.I., Adamiat A., Shahabuddin N.S., Nasir M.N.M., Yusoff Z., Abdul Rashid H.A., Al-Mansoori M.H., Choudhury P.K.
• Other Authors: 56044458100
• Format: Article
• Published: Optical Society of America (OSA) 2023
• Subjects: Bragg gratings; Erbium; Fiber Bragg gratings; Fiber lasers; Fibers; Pumping (laser); Brillouin pump; Brillouin Stokes; Brillouin-erbium fiber lasers; Erbium doped fibers; Laser configuration; Lower pump power; Multiwavelength; Tuning ranges; Single mode fibers
• Institution: Universiti Tenaga Nasional

Utilization of a partially reflective fiber Bragg grating in the development of a multiwavelength Brillouin- erbium fiber laser is proposed. A ring cavity with a preamplified Brillouin pump configuration is implemented to demonstrate much better performance in comparison with the previously reported results obtained with different configurations. The combination of a 7 km long single-mode fiber and a 10 m long erbium-doped fiber ultimately yields the generation of up to twenty-one Brillouin Stokes lines. The laser configuration provides a greater tuning range of 21 nm at a Brillouin pump power of 2 mW and 980 nm pump power of 20 mW, and requires a much lower pump power to initiate lasing. � 2009 Optical Society of America.