Enhanced electrochemical detection of iodide at a reduced graphene oxide-modified carbon electrode in iodized salts

• Main Authors: Jamilan, Mohd Azerulazree, Abdullah, Jaafar, Alang Ahmad, Shahrul Ainliah, Md Noh, Mohd Fairulnizal
• Format: Article
• Published: Elsevier 2022
• Online Access: http://psasir.upm.edu.my/id/eprint/101262/; https://www.sciencedirect.com/science/article/pii/S0308814622013449
• Institution: Universiti Putra Malaysia

In this study, enhancement of electrochemical performance of electrochemically reduced graphene oxide (ERGO) on a screen-printed carbon electrode (SPCE) (ERGO/SPCE) coupled with ion-pairing (cetyltrimethylammonium bromide, CTAB) for the determination of iodide in table salt has been described. The electrode modification of ERGO/SPCE was conducted using cyclic voltammetric (CV) scanning in the potential range of 1.3–0.4 V for 50 cycles after the drop-casting of graphene oxide (GO) suspension on the SPCE. It was found that the electro-active surface area of ERGO/SPCE was increased by 1.5-fold compared to the bare SPCE. ERGO/SPCE sensor displays linearity towards iodide in the concentration range from 0.020 to 1.0 mg/L (sensitivity = 5.40 µA(mg/L)−1, R2 = 0.9906) with the limit of detection (LOD) and limit of quantitation (LOQ) of 0.070 mg/L and 0.21 mg/L, respectively. The comparison between polarography and ERGO/SPCE sensor was in good agreement.