Investigating the effect of taper length on sensitivity of the tapered-fiber based temperature sensor

• Main Authors: Musa, Baktiar, Mustapha Kamil, Yasmin, Abu Bakar, Muhammad Hafiz, Muhammad Noor, Ahmad Shukri, Ismail, Alyani, Mahdi, Mohd Adzir
• Format: Article
• Language: English
• Published: Penerbit UTM Press 2016
• Online Access: http://psasir.upm.edu.my/id/eprint/47421/1/Investigating%20the%20effect%20of%20taper%20length%20on%20sensitivity%20of%20the%20tapered-fiber%20based%20temperature%20sensor.pdf; http://psasir.upm.edu.my/id/eprint/47421/; http://www.jurnalteknologi.utm.my/index.php/jurnalteknologi/article/view/7479
• Institution: Universiti Putra Malaysia

A temperature sensor using single-mode tapered fiber is presented. To better understand the behaviour of a tapered optical fiber, transmission experiments with different taper profiles, specifically waist length were performed. The effects of taper profiles on the sensitivity of the sensor were also investigated. It is demonstrated that careful selection of the taper profile can increase the sensitivity of the sensor. In our experiment, a good temperature sensing result was achieved using the optimum parameter. The best sensitivity achieved was 45.5 pm/°C that measured the range of temperature from 30°C to 120°C. The fabricated sensors are easy to fabricate and relatively low cost. Our results indicate that the tapered fiber based temperature sensor has high sensitivity and good repeatability.