Electromyography signal on biceps muscle in time domain analysis
Features extraction is important for electromyography (EMG) signal analysis. The paper’s objective is to evaluate the features extraction of the EMG signal. The experimental set-up for EMG signal acquisition followed the procedures recommended by Europe’s Surface Electromyography for Non-invasive...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Article |
| 語言: | English |
| 出版: |
Universiti Malaysia Pahang
2014
|
| 主題: | |
| 在線閱讀: | http://eprints.utem.edu.my/id/eprint/13778/1/17_Yahya_et_al_ELECTROMYOGRAPHY_SIGNAL_ON_BICEPS_MUSCLE_IN_TIME_DOMAIN.pdf http://eprints.utem.edu.my/id/eprint/13778/ |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | Features extraction is important for electromyography (EMG) signal analysis. The
paper’s objective is to evaluate the features extraction of the EMG signal. The
experimental set-up for EMG signal acquisition followed the procedures recommended
by Europe’s Surface Electromyography for Non-invasive Assessment of Muscle
(SENIAM) project. The EMG signal’s data were analysed in the time domain to get the
features. Four features were considered based on the analysis, which are IEMG, MAV,
VAR and RMS. The average muscle force condition can be estimated by correlation
between the EMG voltage amplitude with linear estimation with the full-wave
rectification method. The R-squared value determined the correlation between the EMG
voltage amplitude with the loads. IEMG was chosen as the reference feature for
estimation of the muscle’s force due to its R-squared value equal to 0.997. By referring
to the IEMG, the linear equation obtained from the correlation was used for estimation
of the muscle’s force. These findings can be integrated to design a muscle force model
based on the biceps muscle. |
|---|