Investigation of the piezoelectric charge coefficient d33 of thick-film piezoelectric ceramics by varying poling and repoling conditions

• Main Authors: Mohd Radzi, Muhamad Haffiz, Kok, Swee Leong
• Format: Conference or Workshop Item
• Language: English
• Published: 2014
• Subjects: TK Electrical engineering. Electronics Nuclear engineering
• Online Access: http://eprints.utem.edu.my/id/eprint/14859/1/ICoMEIA2014.pdf; http://eprints.utem.edu.my/id/eprint/14859/; http://scitation.aip.org/content/aip/proceeding/aipcp/10.1063/1.4915801
• Institution: Universiti Teknikal Malaysia Melaka

Piezoelectric ceramics are commonly used in various sensing applications. In this paper, the effect of poling and repoling conditions on thick-film piezoelectric ceramics were investigated. The piezoelectric charge coefficient of the piezoelectric ceramics were measured with varying poling conditions, where the effect of changing poling temperature and electrical field on the d33 were analyzed. This was followed by investigating on the effect high applied electrical fields results in repolarization the alignment of the piezoelectric domain in the opposite direction. The temperature and electrical field dependence polarization of the thick-film piezoelectric ceramics were varied near to its Curie temperature between 50oC to 250oC and at a range of electrical field from 20 V (400 kV/mm) up to 200 V (4 MV/mm). It was found that the piezoelectric properties increases with increasing the poling electric field and poling temperature significantly. The maximum values of piezoelectric coefficient were obtained for the piezoelectric ceramics poled at the Curie temperature with high electric fields for 15 min. The aging behavior of the piezoelectric ceramics shows that piezoelectric charge coefficient d33 depends on the poling and repoling conditions.