-31 DBM Sensitivity High Efficiency Rectifier For Energy Scavenging
RF energy scavenging is capable in converting RF signals into electricity and has become a promising solution to power energy-constrained wireless networks.However,it has low power conversion efficiency especially when the harvested RF power is small.For this reason,we propose an enhanced different...
Saved in:
Main Authors: | , |
---|---|
格式: | Article |
語言: | English |
出版: |
ELSEVIER
2018
|
主題: | |
在線閱讀: | http://eprints.utem.edu.my/id/eprint/21748/2/AEUmain2018.pdf http://eprints.utem.edu.my/id/eprint/21748/ https://www.sciencedirect.com/science/article/pii/S1434841117328017 https://doi.org/10.1016/j.aeue.2018.04.019 |
標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
機構: | Universiti Teknikal Malaysia Melaka |
語言: | English |
總結: | RF energy scavenging is capable in converting RF signals into electricity and has become a promising solution to
power energy-constrained wireless networks.However,it has low power conversion efficiency especially when the harvested RF power is small.For this reason,we propose an enhanced differential-drive rectifier to improve the efficiency and the sensitivity of rectifier for energy scavenging applications.The proposed rectifier achieves
dynamically controlled threshold voltage and reduces leakage current in the transistors through DTMOS transistor in differential-drive topology.The voltage boosting circuit further increases the sensitivity through step up the input signal before the signal enters the rectifier.The decoupling capacitor shunts the noise of the input signal before the signal is injected into the cross-connected gate reducing the voltage drop and maintaining the PCE of the rectifier.The rectifier is designed based on the 0.18 µm Silterra CMOS process technology.Effects of decoupling capacitors,voltage boosting circuit and output load on PCE of the rectifier have been evaluated.Technology scaling and parasitic effects to the rectifier have also been presented. Performance of N-stages proposed rectifier has been compared with the conventional BTMOS rectifier.The proposed method achieves the highest sensitivity of −31 dBm for 1, 3 and 5 stages rectifiers without the need of off-chip load capacitor. |
---|