2.45 GHz Rectenna With High Gain For RF Energy Harvesting

• Main Authors: Meor Said, Maizatul Alice, Misran, Mohamad Harris, Mohd Noor, Faza Syahirah, Husain, Mohd Nor, Zakaria, Zahriladha
• Format: Article
• Language: English
• Published: Universitas Ahmad Dahlan (UAD) 2019
• Online Access: http://eprints.utem.edu.my/id/eprint/24475/2/%5B22%5D%20TELKOMNIKA.PDF; http://eprints.utem.edu.my/id/eprint/24475/; http://journal.uad.ac.id/index.php/TELKOMNIKA/article/view/11592
• Institution: Universiti Teknikal Malaysia Melaka

This paper presents a high gain rectenna at 2.45 GHz. Two layers low cost FR4 substrate has been used with air-gap technology for this fabricated rectenna. The proposed designs contain antenna and open stub rectifying circuits with feedline. With the dimension of 100x100x5 mm3, this rectenna can perform high gain. The technique of air gap approach has been used for this proposed rectenna design so as to increase the antenna gain. Second and third harmonics has been eliminated by the introducing of triangular slot and ground plane to the developed design. The proposed rectenna successfully achievedthe output voltages reaches 0.46 V when the input power is 0 dBm respectively when the input power range is between -25 to 30 dBm. It is also can reach up to 6V when the maximum input power is applied. High gain, simple design, low profile and easy integration are the main advantages of this design of the rectenna when compared to past researchers.