The oil sorption behaviour investigation of Kapok (Ceiba pentandra (L.)) fiber
As oil exploration and production activities have risen globally, water contamination from oil spills and the discharge of other oily wastewaters has emerged as one of the primary environmental concerns. Thus, Kapok fiber is considered in this study as it is known as one of the most effective meth...
Saved in:
| Main Authors: | , , , , , , |
|---|---|
| Format: | Conference or Workshop Item |
| Language: | English |
| Published: |
2024
|
| Subjects: | |
| Online Access: | http://eprints.uthm.edu.my/11644/1/P16581_7e5af60709be7dba64d29108c5a0d05f%2010.pdf http://eprints.uthm.edu.my/11644/ https://doi.org/10.1063/5.0183198 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Tun Hussein Onn Malaysia |
| Language: | English |
| Summary: | As oil exploration and production activities have risen globally, water contamination from oil spills and the discharge of
other oily wastewaters has emerged as one of the primary environmental concerns. Thus, Kapok fiber is considered in this study as it
is known as one of the most effective method for cleaning up and collecting oil spills where Kapok is a natural cellulosic fiber with
unique characteristics. A critical investigation was conducted to study the potential of kapok fiber as sorbent material, also analyze the
surface properties of kapok fiber for the ability of kapok fiber to absorb oil and investigate the sorption mechanisms of kapok fiber.
Therefore, the surface properties of kapok fiber were analyzed using SEM, FTIR, TGA and contact angle. To investigate the selectivity
nature and the sorption capacity of 5 g kapok fiber, different types of oil and different apparent viscosity were used. The types of oil
used are gear oil (low viscosity), vegetable oil-based cooking oil (medium viscosity) and waste oil (high viscosity). Kapok fiber was
able to absorb all types of oil, with wasted oil absorbing the most about 17.88 g.g-1. Scanning electron microscopy (SEM) was used to
examine the morphology of raw kapok fiber. In this study, kapok fiber was shown to have a porous hollow lumen structure and a waxy
coating on the surface. Other than that, for the contact angle analysis, kapok fiber had high water contact angle up to 130˚. The water
droplet was stood on the kapok fibers surfaces before and after absorption with contact angles ranging from 130˚ to 145˚. In contrast,
the oil droplet had disappeared from the surfaces of kapok fiber within a few seconds |
|---|