Designing bevel preparation tool using inventor for the preparation of angles in welding process

This study was performed to test the design and analyze the strength of the bevel preparation tool in the preparation of the workpiece for the welding process. The purpose of this study is to perform stress analysis of a product that can be used by the user in the process of providing bevel for plat...

全面介紹

Saved in:
書目詳細資料
Main Authors: Nasir, Nasir, Abdullah, M. A., L., N. H
格式: Conference or Workshop Item
語言:English
出版: 2021
主題:
在線閱讀:http://eprints.uthm.edu.my/1396/1/P12598_d0c3bffb94a042af498a2c4a2ee3e45b.pdf
http://eprints.uthm.edu.my/1396/
https://doi.org/10.30880/ritvet. 2021.01.01.007
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
機構: Universiti Tun Hussein Onn Malaysia
語言: English
實物特徵
總結:This study was performed to test the design and analyze the strength of the bevel preparation tool in the preparation of the workpiece for the welding process. The purpose of this study is to perform stress analysis of a product that can be used by the user in the process of providing bevel for plate work for the welding process. ADDIE's design model serves as a guide in the development of this product. The ADDIE model consists of five phases namely analysis phase, design phase, development phase, implementation phase, and evaluation phase. This study also involves Autodesk Inventor software to perform stress analysis in product evaluation of bevel preparation tool in the welding process. thus can find data on mises stress, 1st principal stress, 3rd principal stress, displacement, and safety factor. The simulation results showed that it could withstand 527.029MPa and a safety factor of 0.474357 ul up to 15 ul. In conclusion, the bevel preparation tool in the welding process is able to assist in the preparation of the corners and can withstand durability when applied to this product.