Development of time delay voltage control for lead acid battery using arduino
A time delay controller with voltage control technique is designed and developed in this project. In order to control the output voltage, a DC-DC buckboost converter has been development. The buckboost circuit with mosfet as a switching component has been drives by using gate driver as a mediu...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English English |
| Published: |
2014
|
| Subjects: | |
| Online Access: | http://eprints.uthm.edu.my/1632/1/24%20NURUL%20NADIA%20MOHAMMAD.pdf http://eprints.uthm.edu.my/1632/2/NURUL%20NADIA%20MOHAMMAD%20WATERMARK.pdf http://eprints.uthm.edu.my/1632/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Tun Hussein Onn Malaysia |
| Language: | English English |
| Summary: | A time delay controller with voltage control technique is designed and developed in
this project. In order to control the output voltage, a DC-DC buckboost converter has
been development. The buckboost circuit with mosfet as a switching component has
been drives by using gate driver as a medium between buckboost circuit and the
ARDUINO that generates the PWM signals. The several of input voltage range
which is from 10V for minimum voltage until 18V for maximum voltage has been
tested in this project to determine the effectiveness of the output results for charging
a battery. Finally, the control performance was evaluated through both simulations
by using MATLAB software and also the experimental hardware. The results are
observed in three conditions which are simulation, open loop control and close loop
control. The simulation and experimental hardware results indicate that this control
method shows successful for charging a battery. |
|---|