Three phase boost rectifier design

• Main Author: Saher, Rohaizan
• Format: Thesis
• Language: English; English; English
• Published: 2012
• Subjects: TK2000-2891 Dynamoelectric machinery and auxiliaries. Including generators, motors, transformers
• Online Access: http://eprints.uthm.edu.my/2361/1/24p%20ROHAIZAN%20SAHER.pdf; http://eprints.uthm.edu.my/2361/2/ROHAIZAN%20SAHER%20COPYRIGHT%20DECLARATION.pdf; http://eprints.uthm.edu.my/2361/3/ROHAIZAN%20SAHER%20WATERMARK.pdf; http://eprints.uthm.edu.my/2361/
• Institution: Universiti Tun Hussein Onn Malaysia

An electric power can be converted from one form to another form by using power electronics devices. The function of power electronics circuits by using semiconductor devices as switch is modifying or controlling a voltage. The goal of power electronics circuits are to convert electrical energy from one form to another, from source to load with highest efficiency, high availability and high reliability with the lowest cost, smallest size and weight. The term rectification refers to the power circuit whose function is to alter the ac characteristic of the line electric power to produce a “rectified”ac power at the load side that contain the dc value In this project, a study has done for the two types of rectifier topology of alternating current to direct current voltage of a three-phase boost rectifier with pulse width modulation (PWM) and a threephase boost rectifier with active power filter (APF). Power factor, shape distortion and voltage can be increased as much as seen through two types of this topology if it is connected to the non-linear loads in power systems. Three phase rectifier with pulsewidth modulation (PWM) is one of controlled rectifier consist six pulses divides into two groups which are top group and bottom group. For top group, IGBT with its collector at the highest potential will conduct at one time. The other two will be reversed. Thus for bottom group, IGBT with the its emitter at the lowest potential will conduct. This project also observes the current, voltage waveform and the harmonics component when the active power filter (AFC) placed in series with non-linear load. Type of rectifier used is uncontrolled rectifier. In this work MATLAB/SIMULINK power system toolbox is used to simulate the system Results of simulations carried out, the advantages and disadvantages, the increase in voltage and waveform distortion for the system under consideration can be shown