Synthesis, characterisation and evaluation on the performance of ferrofluid for microplastic removal from synthetic and actual wastewater
Synthesis of ferrofluid without the addition of stabilizing agents or surfactants is an innovation of new method for microplastic removal. This study focuses on the ability of several types of oils as carriers and how they may improve the removal efficiency of the microplastic. The method is relat...
Saved in:
Main Authors: | , , , , , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Elsevier
2021
|
Subjects: | |
Online Access: | http://eprints.uthm.edu.my/4055/1/J12756_7d40a84f71160215951d37e4dece33ff.pdf http://eprints.uthm.edu.my/4055/ https://doi.org/10.1016/j.jece.2021.105894 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Institution: | Universiti Tun Hussein Onn Malaysia |
Language: | English |
id |
my.uthm.eprints.4055 |
---|---|
record_format |
eprints |
spelling |
my.uthm.eprints.40552021-11-24T01:43:10Z http://eprints.uthm.edu.my/4055/ Synthesis, characterisation and evaluation on the performance of ferrofluid for microplastic removal from synthetic and actual wastewater Hamzah, Sofiah Lau, Yuke Ying Abd. Rahman Azmi, Alyza Azzura Razali, Nurul Ashraf Hairom, Nur Hanis Hayati Mohamad, Nurul Aqilah Che Harun, Mohammad Hakim TD429.5-480.7 Water purification. Water treatment and conditioning. Saline water conversion Synthesis of ferrofluid without the addition of stabilizing agents or surfactants is an innovation of new method for microplastic removal. This study focuses on the ability of several types of oils as carriers and how they may improve the removal efficiency of the microplastic. The method is relatively low cost, simple and sustainable. The formation of ferrofluid involved the mixing of oil and iron oxide powder. The experimental work was commenced by adding 2 mm polyethylene terephthalate (PET) microplastics into synthetic ferrofluid. Then, the removal efficiency of microplastics was examined by varying the elements of ferrofluid based on three specific parameters, namely type of oil, volume of oil and dosage of iron oxide to obtain a standard formulation of the optimum results. Overall findings of the study indicated that the optimum formulation for ferrofluid preparation was at a ratio of 1:2.5 (volume of oil: dosage of magnetite) using lubricating oil which has successfully removed 99% of microplastic from water media. Subsequently, the physical and chemical properties of the prepared ferrofluid were also analysed using scanning electron microscope (SEM) and Fourier transform infrared (FTIR) spectroscopy. Performance evaluation of the prepared ferrofluid on actual wastewater (laundry wastewater) revealed that 64% of microplastics were removed after treatment. Elsevier 2021 Article PeerReviewed text en http://eprints.uthm.edu.my/4055/1/J12756_7d40a84f71160215951d37e4dece33ff.pdf Hamzah, Sofiah and Lau, Yuke Ying and Abd. Rahman Azmi, Alyza Azzura and Razali, Nurul Ashraf and Hairom, Nur Hanis Hayati and Mohamad, Nurul Aqilah and Che Harun, Mohammad Hakim (2021) Synthesis, characterisation and evaluation on the performance of ferrofluid for microplastic removal from synthetic and actual wastewater. Journal of Environmental Chemical Engineering, 9. pp. 1-8. https://doi.org/10.1016/j.jece.2021.105894 |
institution |
Universiti Tun Hussein Onn Malaysia |
building |
UTHM Library |
collection |
Institutional Repository |
continent |
Asia |
country |
Malaysia |
content_provider |
Universiti Tun Hussein Onn Malaysia |
content_source |
UTHM Institutional Repository |
url_provider |
http://eprints.uthm.edu.my/ |
language |
English |
topic |
TD429.5-480.7 Water purification. Water treatment and conditioning. Saline water conversion |
spellingShingle |
TD429.5-480.7 Water purification. Water treatment and conditioning. Saline water conversion Hamzah, Sofiah Lau, Yuke Ying Abd. Rahman Azmi, Alyza Azzura Razali, Nurul Ashraf Hairom, Nur Hanis Hayati Mohamad, Nurul Aqilah Che Harun, Mohammad Hakim Synthesis, characterisation and evaluation on the performance of ferrofluid for microplastic removal from synthetic and actual wastewater |
description |
Synthesis of ferrofluid without the addition of stabilizing agents or surfactants is an innovation of new method
for microplastic removal. This study focuses on the ability of several types of oils as carriers and how they may
improve the removal efficiency of the microplastic. The method is relatively low cost, simple and sustainable.
The formation of ferrofluid involved the mixing of oil and iron oxide powder. The experimental work was
commenced by adding 2 mm polyethylene terephthalate (PET) microplastics into synthetic ferrofluid. Then, the
removal efficiency of microplastics was examined by varying the elements of ferrofluid based on three specific
parameters, namely type of oil, volume of oil and dosage of iron oxide to obtain a standard formulation of the
optimum results. Overall findings of the study indicated that the optimum formulation for ferrofluid preparation
was at a ratio of 1:2.5 (volume of oil: dosage of magnetite) using lubricating oil which has successfully removed
99% of microplastic from water media. Subsequently, the physical and chemical properties of the prepared
ferrofluid were also analysed using scanning electron microscope (SEM) and Fourier transform infrared (FTIR)
spectroscopy. Performance evaluation of the prepared ferrofluid on actual wastewater (laundry wastewater)
revealed that 64% of microplastics were removed after treatment. |
format |
Article |
author |
Hamzah, Sofiah Lau, Yuke Ying Abd. Rahman Azmi, Alyza Azzura Razali, Nurul Ashraf Hairom, Nur Hanis Hayati Mohamad, Nurul Aqilah Che Harun, Mohammad Hakim |
author_facet |
Hamzah, Sofiah Lau, Yuke Ying Abd. Rahman Azmi, Alyza Azzura Razali, Nurul Ashraf Hairom, Nur Hanis Hayati Mohamad, Nurul Aqilah Che Harun, Mohammad Hakim |
author_sort |
Hamzah, Sofiah |
title |
Synthesis, characterisation and evaluation on the performance of ferrofluid
for microplastic removal from synthetic and actual wastewater |
title_short |
Synthesis, characterisation and evaluation on the performance of ferrofluid
for microplastic removal from synthetic and actual wastewater |
title_full |
Synthesis, characterisation and evaluation on the performance of ferrofluid
for microplastic removal from synthetic and actual wastewater |
title_fullStr |
Synthesis, characterisation and evaluation on the performance of ferrofluid
for microplastic removal from synthetic and actual wastewater |
title_full_unstemmed |
Synthesis, characterisation and evaluation on the performance of ferrofluid
for microplastic removal from synthetic and actual wastewater |
title_sort |
synthesis, characterisation and evaluation on the performance of ferrofluid
for microplastic removal from synthetic and actual wastewater |
publisher |
Elsevier |
publishDate |
2021 |
url |
http://eprints.uthm.edu.my/4055/1/J12756_7d40a84f71160215951d37e4dece33ff.pdf http://eprints.uthm.edu.my/4055/ https://doi.org/10.1016/j.jece.2021.105894 |
_version_ |
1738581201492377600 |