Industrial guideline for injection moulding : case of jaundice meter

• Main Authors: Azman, Naqibah, Muhd Nor, Nik Hisyamudin, Hassan, Mohd Fahrul, Burhan, Mohd Hafiz, Muhd Muji, Siti Zarina, Mohamad, Fariza, Mohd Turan, Faiz, Bahasa, Abdul Rahman, Seiji, Yokoyama
• Format: Article
• Language: English
• Published: WARSE 2020
• Subjects: TA Engineering (General). Civil engineering (General)
• Online Access: http://eprints.uthm.edu.my/6429/2/AJ%202020%20%28869%29.pdf; http://eprints.uthm.edu.my/6429/; https://doi.org/10.30534/ijatcse/2020/5291.12020
• Institution: Universiti Tun Hussein Onn Malaysia

In designing industries, a lot of measures need to be taken before coming to the final design phase. During the initial stage of designing a product, designers usually will design according to their sketching without considering guidelines for mass production manufacturing. This will consume soo much time on re-designing for to suit manufacturing requirement. There-fore this paper purpose to consider industrial guideline specifically on designing product directly for injection moulding. The most basic requirement on design for direct manufacturing that designers need to consider while designing are wall thick-ness, rib, boss and cored holes, suggested design for corners and materials selection. The guideline was applied to a jaun-dice meter prototype design as a case study.