Simple, fast and accurate two-diode model for photovoltaic modules

• Main Authors: Ishaque, Kashif, Salam, Zainal, Taheri, Hamed
• Format: Article
• Published: Elsevier B.V. 2011
• Subjects: TK Electrical engineering. Electronics Nuclear engineering
• Online Access: http://eprints.utm.my/id/eprint/26555/; http://dx.doi.org/10.1016/j.solmat.2010.09.023
• Institution: Universiti Teknologi Malaysia

This paper proposes an improved modeling approach for the two-diodemodel of photovoltaic (PV) module. The main contribution of this work is the simplification of the current equation, in which only four parameters are required, compared to six or more in the previously developed two-diodemodels. Furthermore the values of the series and parallel resistances are computed using a simple and fast iterative method. To validate the accuracy of the proposed model, six PV modules of different types (multi-crystalline, mono-crystalline and thin-film) from various manufacturers are tested. The performance of the model is evaluated against the popular single diodemodels. It is found that the proposed model is superior when subjected to irradiance and temperature variations. In particular the model matches very accurately for all important points of the I–V curves, i.e. the peak power, short-circuit current and open circuit voltage. The modeling method is useful for PV power converter designers and circuit simulator developers who require simple, fast yet accuratemodel for the PV module.