On the mesh dependence of non-linear mechanical finite element analysis
This paper addresses the mesh-dependence of non-linear mechanical finite element analysis. To this end, finite element meshes that are assembled by various element types and their solutions are compared. Voxel, tetrahedron, hexahedron and mixed (hex-dominant) meshes are considered. Different bench m...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Published: |
Elsevier B.V.
2010
|
| Subjects: | |
| Online Access: | http://eprints.utm.my/id/eprint/26589/ http://dx.doi.org/10.1016/j.finel.2009.12.003 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Teknologi Malaysia |
| Summary: | This paper addresses the mesh-dependence of non-linear mechanical finite element analysis. To this end, finite element meshes that are assembled by various element types and their solutions are compared. Voxel, tetrahedron, hexahedron and mixed (hex-dominant) meshes are considered. Different bench marking parameters for the elastic and plastic solutions as well as for the computational load are determined. First, bending beams with a square, a circular and a rail cross-section are calculated accounting for non-linear material behavior (plasticity). A strong dependence on the mesh type is observed and the best results are obtained for mixed meshes and hexahedron-only meshes. In the second part of this study, finite element models that are based on the complex geometry of metallic foam are considered. Computed tomography data is used to generate geometrically complex finite element models and a convergence analysis is performed. Again, superior performance is found for mixed meshes. |
|---|