Development of a fuzzy system model for candidate-well selection for hydraulic fracturing in a carbonate reservoir
With current technology, it is only possible to extract 20% to 25% of the original oil in place from Iranian carbonate reservoirs, 10% less than the world average. In addition, formation damage is a serious problem in those reservoirs, which mainly caused by asphaltene precipitation, sand production...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Published: |
2012
|
| Subjects: | |
| Online Access: | http://eprints.utm.my/id/eprint/46806/ https://dx.doi.org/10.2118/153200-MS |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Teknologi Malaysia |
| Summary: | With current technology, it is only possible to extract 20% to 25% of the original oil in place from Iranian carbonate reservoirs, 10% less than the world average. In addition, formation damage is a serious problem in those reservoirs, which mainly caused by asphaltene precipitation, sand production, and ineffective stimulation method. The majority of mature carbonate reservoirs in Iran have low permeability and high skin values. Therefore, such reservoirs are capable of producing at commercial rates only if they are hydraulically fractured. Acid fracturing is usually reported as a standard method for fracturing in carbonate reservoirs. Hydraulic Fracturing (HF) technology, which was originally applied to overcome near wellbore damage, is a proper replacement stimulation method. It is evident that to adopt this technology, considerable efforts have to be strenuous in candidate-well selection. As asserted in the literature, even though a common practice, candidate-well selection is not a straightforward process and up to now, there has not been a well-defined approach to address this process. |
|---|