Extrinsic surface scattering and intrinsic absorption loss of vinyl based hybrid organic-inorganic materials for optical waveguides applications

• Main Authors: Abdullah, Ahmad Sharmi, Nawabjan, Amirjan, Mohd.Kassim, Norazan, Ibrahim, Mohd. Haniff, Abdul Malek, Mohamad Zahid, Zainuddin, Mat Tamizi, Abdul Aziz Nazri, Shamsul Azrolsani
• Format: Article
• Published: Elsevier GmbH 2014
• Subjects: TK Electrical engineering. Electronics Nuclear engineering
• Online Access: http://eprints.utm.my/id/eprint/52839/; https://dx.doi.org/10.1016/j.ijleo.2013.07.065
• Institution: Universiti Teknologi Malaysia

Hybrid photosensitive materials were prepared by using vinyltriethoxysilane (VTES), tetraethoxysilane (TEOS) and tetrabutoxytitanate (TTBu) precursors through sol-gel technique. The materials are intended for optical telecommunication applications. Thus, high optical transmissions at the second and third optical telecommunication windows are essential. Extrinsic surface scattering due to surface roughness and intrinsic absorption due to aliphatic CH and OH groups are always ascribable to the optical power attenuations at aforementioned optical telecommunication windows. Optical waveguide based on hybrid sol-gel materials were fabricated, characterized and analyzed in order to investigate the extrinsic and intrinsic sources of attenuation and their contributions. The fabricated samples were characterized for propagation loss, surface condition, and Fourier transform IR (FTIR) absorption spectra. Propagation loss were measured by means of cut-back method as 1.6 and 6.9 dB/cm at 1310 and 1550 nm wavelengths, respectively. Surface scattering loss was modeled based on measured rms roughness of 0.724 nm and turned out to contribute less than 0.01% of the total propagation loss. FTIR absorption spectra show the persistent existence of aliphatic CH and OH groups within the final hybrid sol-gel materials.