Influence of clay particles on Al2O3 and TiO2 nanoparticles transport and retention through limestone porous media: measurements and mechanisms

• Main Authors: Bayat, Ali Esfandyari, Junin, Radzuan, Mohsin, Rahmat, Hokmabadi, Mehrdad, Shamshirband, Shahaboddin
• Format: Article
• Published: Kluwer Academic Publishers 2015
• Subjects: TP Chemical technology
• Online Access: http://eprints.utm.my/id/eprint/55841/; http://dx.doi.org/10.1007/s11051-015-3031-4
• Institution: Universiti Teknologi Malaysia

Utilization of nanoparticles (NPs) for a broad range of applications has caused considerable quantities of these materials to be released into the environment. Issues of how and where the NPs are distributed into the subsurface aquatic environments are questions for those in environmental engineering. This study investigated the influence of three abundant clay minerals namely kaolinite, montmorillonite, and illite in the subsurface natural aquatic systems on the transport and retention of aluminum oxide (Al2O3, 40 nm) and titanium dioxide (TiO2, 10–30 nm) NPs through saturated limestone porous media. The clay concentrations in porous media were set at 2 and 4 vol% of the holder capacity. Breakthrough curves in the columns outlets were measured using a UV–Vis spectrophotometer. It was found that the maximum NPs recoveries were obtained when there was no clay particle in the porous medium. On the other hand, increase in concentration of clay particles has resulted in the NPs recoveries being significantly declined. Due to fibrous structure of illite, it was found to be more effective for NPs retention in comparison to montmorillonite and kaolinite. Overall, the position of clay particles in the porous media pores and their morphologies were found to be two main reasons for increase of NPs retention in porous media