An optical spectroscopic based reflective sensor for CO2 measurement with signal to noise ratio improvement

• Main Authors: Salim, Mohd. Rashidi, Yaacob, Maslina, Ibrahim, Mohd. Haniff, Azmi, A. I., Ngajikin, Nor Hafizah, Dooly, Gerard, Lewis, Elfed
• Format: Article
• Published: National Institute of Optoelectronics 2015
• Subjects: TK Electrical engineering. Electronics Nuclear engineering
• Online Access: http://eprints.utm.my/id/eprint/57781/
• Institution: Universiti Teknologi Malaysia

This paper presents recent work in measuring carbon dioxide (CO2) using an absorption spectroscopy method within themid-IR region. A multi-path optical fibre based reflective sensor is proven to be capable of detecting CO2at lower level(<15%) and higher level of concentration (>15%). For low level detection, the sensor is capable of measuring CO2concentration from 0.8% to 14.8%, while for high level of detection, the sensor showed its capability to detect CO2concentration from 15.1% to 44.6% with high accuracy. By eliminating unwanted noises usingsuitablefiltering technique,the voltage response from the system has become more stable and without significantloss in voltage, thus improving thesignal-to-noiseratioand stability of the system. The average signal-to-noise ratio for each of the filter types, no filter,lowpass, bandpass were calculated as being 53.4, 69.1 and 119.0 respectively. Similarly,moving average technique wasdeveloped in LabVIEW to improve voltage response with less noise and interference, resulting better overall system’sperformance.