Empirical strength envelope for shale
Effectively, strength envelope describes behavior of rock when subjected to common stresses in construction, i.e. compressive, triaxial and tensile stresses. This study is aimed at investigating the strength envelope for shale, a sedimentary rock obtained from dam project site in Baram, Sarawak. Ser...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Penerbit UTM Press
2016
|
| Subjects: | |
| Online Access: | http://eprints.utm.my/id/eprint/69378/1/MohdForMohd2016_Empiricalstrengthenvelopeforshale.pdf http://eprints.utm.my/id/eprint/69378/ http://dx.doi.org/10.11113/jt.v78.9505 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Teknologi Malaysia |
| Language: | English |
| Summary: | Effectively, strength envelope describes behavior of rock when subjected to common stresses in construction, i.e. compressive, triaxial and tensile stresses. This study is aimed at investigating the strength envelope for shale, a sedimentary rock obtained from dam project site in Baram, Sarawak. Series of triaxial compression tests were carried out to obtain the strength envelope for the rock samples. For verification of failure criterion, uniaxial compression and Brazilian tests were also conducted on the rock samples. Results from the relevant tests were analysed using RocData software to obtain the strength envelope. Subsequently, Mohr-Coulomb and Hoek-Brown failure criterion are used to determine failure envelop for the rock samples. Based on the failure envelopes and the related strengths (i.e. compressive and tensile strength), suitability of both approach, in defining strength envelope for shale, is verified. The study shows that for highly laminated sedimentary rock like shale, Hoek-Brown criterion gave a more representative failure behaviour. The failure envelope clearly shown all the strength limits when the rock is subjected to triaxial, uniaxial and tensile stress, which is not clearly shown in the Mohr-Coulomb criterion. Therefore, Hoek-Brown criterion is a more appropriate method for describing strength envelope, as it able to show the limiting stresses when rock samples are subjected to common stresses in construction. |
|---|