Constant and high switching frequency torque controller for DTC drives
The letter presents a new method of increasing the switching frequency of a direct torque control (DTC) of induction machines. The method simply replaces the hysteresis comparator of the conventional DTC drives with a triangular waveform-based constant switching frequency controller. By synchronizi...
Saved in:
| Main Authors: | , , |
|---|---|
| 格式: | Article |
| 語言: | English |
| 出版: |
IEEE
2005
|
| 主題: | |
| 在線閱讀: | http://eprints.utm.my/id/eprint/7306/1/A_H_Yatim_2005_Constant_High_Switching_Frequency_Torque.pdf http://eprints.utm.my/id/eprint/7306/ http://dx.doi.org/10.1109/LPEL.2005.851316 |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 機構: | Universiti Teknologi Malaysia |
| 語言: | English |
| 總結: | The letter presents a new method of increasing the
switching frequency of a direct torque control (DTC) of induction machines. The method simply replaces the hysteresis comparator of the conventional DTC drives with a triangular waveform-based constant switching frequency controller. By synchronizing the digital signal processor (DSP) sampling with a triangular waveform
and with an appropriate systematic controller design, a high switching frequency DTC drive is possible without requiring a high-frequency space-vector modulator. The implementation of the controller is simple and operates based on waveform comparisons; in this letter it is implemented using a combination of a DSP and a field programmable gate array device. Simulation and experimental results indicate that the controller both reduces the torque ripple and maintains a constant switching frequency |
|---|