Graphene oxide film as a passive q-switcher in an erbium-doped fiber laser cavity

• Main Authors: Mat, Fauziah Che, Yasin, Moh, Latiff, Anas Abdul, Harun, Sulaiman Wadi
• Format: Article
• Language: English
• Published: Photonics Society of Poland 2017
• Subjects: TK Electrical engineering. Electronics Nuclear engineering
• Online Access: http://eprints.utm.my/id/eprint/77505/1/FauziahCheMat2017_GrapheneOxideFilmasPassiveQ-switcher.pdf; http://eprints.utm.my/id/eprint/77505/; http://photonics.pl/PLP/index.php/letters/article/view/9-36
• Institution: Universiti Teknologi Malaysia

All-fiber passively Q-switched fiber lasers have been demonstrated by using a graphene oxide (GO) Q-switcher for possible applications in telecommunication, laser processing, fiber sensing and medicine. The GO material was obtained through a modified Hummers method from expanded acid washed graphite flakes and was embedded into a polyvinyl alcohol (PVA) film to form a saturable absorber (SA) device. The Q-switched pulse operates at 1563.3nm with a repetition rate that can be tuned from 44.33kHz to 61.77kHz as the pump power changes from 39mW to 96mW. The highest repetition rate of 61.77kHz is achieved at a pump power of 96mW and it is observed that the Q-switched pulse produced a maximum pulse energy of 0.054nJ and pulse width of 5.57 mu s at 96mW pump power.