Performance of a pilot-scale aquaponics system using hydroponics and immobilized biofilm treatment for water quality control

• Main Authors: Li, Chunjie, Zhang, Boyu, Luo, Pengxuan, Shi, Hongtao, Li, Linfang, Gao, Yueshu, Lee, Chew Tin, Zhang, Zhenjia, Wu, Wei Min
• Format: Article
• Published: Elsevier Ltd 2020
• Subjects: TP Chemical technology
• Online Access: http://eprints.utm.my/id/eprint/88563/; http://dx.doi.org/10.1016/j.jclepro.2018.10.170
• Institution: Universiti Teknologi Malaysia

Aquaponics is considered as a promising approach to mass produce both fish meat and vegetable at high rates without discharge pollutants. A novel aquaponics system is proposed to control water quality and enhance nutrition efficiency with high rate immobilized biofilm units, including mass-bio system (MBS) and fiber biofilter (FB), installed between upstream hydroponics units, which are composed of the media filled beds (MFD) and nutrient film technique (NFT), and downstream aquaculture unit for fish rearing. A pilot test was conducted over 130 d to characterize the performance of proposed system which converted residual nutrients from aquaculture unit into ammonium and nitrate at balanced ratio for aquatic plant growth and then removed residual ammonium or/and nitrite to ensue recycled water quality for fish rearing. The kinetics of organic matter removal and nutrient conversion in hydroponics unit and immobilized biofilm units were determined via batch assays over 24 h in the system. The estimated daily pollutant increments for TAN, NO2 −-N, NO3 −-N, TN, DTP and TOC in the system were 0.28, 0.17, 0.20, 0.64, 0.56 and 2.19 mg/L, respectively. The results demonstrated that total ammonia nitrogen (TAN), nitrite (NO2 −-N), nitrate (NO3 −-N), total nitrogen (TN), dissolved total phosphorus (DTP) and total organic carbon (TOC) were maintained at low levels in the system for a long-term. Aquatic plants in MFD and NFT contributed to the removal of TAN, NO2 −-N, NO3 −-N, TN and DTP. The removal efficiencies of MFD versus NFT for TAN were 71.4% vs 43.5% for TAN and 62.5% vs 52.3% for DTP. MBS and FB performed the removal of TAN, NO2 −-N and TOC. The 24 h removal efficiencies of TAN, NO2 −-N and TOC were 71.8%, 58.5% and 3.7% for MBS and 15.7%, 7.7% and 27.2% for FB.