Modelling the dielectric properties of cow's raw milk under vat pasteurization

An efficient microwave milk pasteurization system requires a rigorous temperature dependent dielectric model of the milk, since the performance of milk pasteurization strongly depends on its dielectric properties. This paper describes the dielectric modelling of cow’s raw milk during batch (Vat) pas...

Full description

Saved in:
Bibliographic Details
Main Authors: Abdullah, Suhail Najm, You, Kok Yeow, Khamis, Nor Hisham, Chong, Cheong Yew
Format: Article
Language:English
Published: Electromagnetics Academy 2019
Subjects:
Online Access:http://eprints.utm.my/id/eprint/89448/1/SuhailNajmAbdullah2019_ModellingtheDielectricPropertiesofCowsRaw.pdf
http://eprints.utm.my/id/eprint/89448/
http://dx.doi.org/10.2528/PIERM19052202
Tags: Add Tag
No Tags, Be the first to tag this record!
Institution: Universiti Teknologi Malaysia
Language: English
Description
Summary:An efficient microwave milk pasteurization system requires a rigorous temperature dependent dielectric model of the milk, since the performance of milk pasteurization strongly depends on its dielectric properties. This paper describes the dielectric modelling of cow’s raw milk during batch (Vat) pasteurization which covers the frequencies from 0.2 GHz to 6 GHz. An open-ended coaxial sensor is used for the measurements of dielectric constant, loss factor, and ionic conductivity at temperature range of 25°C to 75°C with an interval of 5°C. Combinations of Cole-Davison and Debye equations are modified to fit the dielectric measurements. It was found that the measured dielectric constant decreased as the frequency increased, while the high temperature processed produce lower in a convergence manner toward 6 GHz. The loss factor exhibited high losses at higher temperature and lower frequencies, as well as converged at 1.9 GHz then diverged up to 6 GHz. Three relaxation processes are dominated at all temperature treatments within the frequency range. The relaxation time, τ, and the activation energy, Q, are modelled based on linear fitting of measured data according to Debye and Arrhenius approaches.