Complex geometry automotive muffler sound transmission loss measurement by experimental method and 1D simulation correlation

A muffler is a device to attenuate noise from the exhaust. The muffler performance determined by the acoustic performance is called sound transmission loss (STL). This paper aims to measure the STL experimentally and correlated with the 1D simulation result. STL was measured using the impedance tube...

全面介紹

Saved in:
書目詳細資料
Main Authors: Mohammad, M., Muhamad Said, M. F., Khairuddin, M. H., A. Kadir, M. K., Dahlan, M. A. A., Zaw, T.
格式: Conference or Workshop Item
語言:English
出版: 2020
主題:
在線閱讀:http://eprints.utm.my/id/eprint/92891/1/MohdFaridMuhamadSaid2020_ComplexGeometryAutomotiveMufflerSoundTransmissionLoss.pdf
http://eprints.utm.my/id/eprint/92891/
http://dx.doi.org/10.1088/1757-899X/884/1/012098
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
實物特徵
總結:A muffler is a device to attenuate noise from the exhaust. The muffler performance determined by the acoustic performance is called sound transmission loss (STL). This paper aims to measure the STL experimentally and correlated with the 1D simulation result. STL was measured using the impedance tube. Four-pole method (microphone) and two-load method were applied to measure the STL. The STL was also determined through the 1D simulation tools software. Three types of mufflers STL were measured; small expansion chamber, big expansion chamber and complex muffler. The respective error between simulation and experiment were 0.17%, 7.89%, and 11.40%. Hence, the STL experiment result was well correlated with the 1D simulation model.