Optimisation of surface integrity model using response surface methodology for EDMed AISI D2 tool steel
In this analysis, the influence of machining parameters, i.e., pulse current (Ip), pulse duration (Ton), duty cycle (Tau) and discharge voltage (V) on the surface roughness (Ra), surface crack density (SCD) and white layer thickness (WLT) of surface created in electrical discharge machining are exam...
Saved in:
Main Authors: | , |
---|---|
Format: | Article |
Published: |
2012
|
Online Access: | http://www.scopus.com/inward/record.url?eid=2-s2.0-84867879673&partnerID=40&md5=e68abe100c2d45745c20f6aa9d64f1bf http://eprints.utp.edu.my/10066/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Institution: | Universiti Teknologi Petronas |
Summary: | In this analysis, the influence of machining parameters, i.e., pulse current (Ip), pulse duration (Ton), duty cycle (Tau) and discharge voltage (V) on the surface roughness (Ra), surface crack density (SCD) and white layer thickness (WLT) of surface created in electrical discharge machining are examined. Experiments were carried out on AISI D2 steel work-piece materials using face centred central composite design. Applying the composite desirability function method, the optimal-setting of the parameters was obtained with a reduced number of experiments that needed to provide sufficient information for statistically acceptable results. Further, to make out the desirability region the overlaid contour plots were presented. The minimal condition for WLT, Ra and SCD were found to be a pulse current of 3 A, a pulse duration of 50 μs, a duty cycle of 80 and discharge voltage 40 volt. Under such optimum conditions, it was observed experimentally minimisation of the said responses. © 2012 Inderscience Enterprises Ltd. |
---|