Fabrication of SWCNT/TiO2 for Creating Self-Cleaning Property on the Glass

The significance of this research is to fabricate a Single Wall Carbon Nanotubes/ Titanium dioxide (SWCNT/TiO2) composite to be coated on glass which has the self-cleaning property. It has been observed that the surface of the glass tends to get dirty and dusty with time. The objectives of this pa...

Full description

Saved in:
Bibliographic Details
Main Author: khalaji assadi, morteza
Format: Article
Published: 2016
Subjects:
Online Access:http://eprints.utp.edu.my/12284/1/Fabrication%20of%20SWCNT-TiO2%20for%20Creating%20Self-Cleaning%20Property%20on%20the%20Glass.pdf
http://eprints.utp.edu.my/12284/
Tags: Add Tag
No Tags, Be the first to tag this record!
Institution: Universiti Teknologi Petronas
id my.utp.eprints.12284
record_format eprints
spelling my.utp.eprints.122842017-11-28T04:45:07Z Fabrication of SWCNT/TiO2 for Creating Self-Cleaning Property on the Glass khalaji assadi, morteza TJ Mechanical engineering and machinery The significance of this research is to fabricate a Single Wall Carbon Nanotubes/ Titanium dioxide (SWCNT/TiO2) composite to be coated on glass which has the self-cleaning property. It has been observed that the surface of the glass tends to get dirty and dusty with time. The objectives of this paper are to compare and analyze the transmittance and also the photocatalytic activity of the nanocomposite solutions prepared. The method used to fabricate this composite is sol-gel synthesis as it has a higher amount of dispersion and is the easiest way to use and the method used to coat the solution on substrate is spin coating method since it has a uniform coating compared to other methods. It is important to ensure that the solution prepared is transparent so as to ease the coating process. 20 different samples were fabricated using different amount of SWCNT and TiO2 composition. In order to analyze transparency and photocatalytic activity, two different characterizations were conducted namely Fourier Transform Infrared Radiation spectroscopy (FTIR) for transmittance and Ultraviolet Visible absorption spectroscopy (UV-vis) for Methylene Blue (MB) concentration photodegradation. The highest transmittance obtained were (a) 10ml of TiO2, 0.04g SWCNT which was 82.2% and (b) 10ml of TiO2, 0.06g SWCNT which was 73.2% of transmittance. Also, the lowest concentrations achieved by MB are (a) 10ml of TiO2, 0.06g SWCNT which was 2.48mg/L and (b) 7.5ml TiO2, 0.02g SWCNT which was 3.1mg/L. By comparing the transmittance and photocatalytic activity, the highest efficiency obtained were (a) 10ml TiO2, 0.06g SWCNT which was 64.6% and also (b) 7.5ml TiO2, 0.04g SWCNT which was 56.3%. 2016-12 Article PeerReviewed application/pdf http://eprints.utp.edu.my/12284/1/Fabrication%20of%20SWCNT-TiO2%20for%20Creating%20Self-Cleaning%20Property%20on%20the%20Glass.pdf khalaji assadi, morteza (2016) Fabrication of SWCNT/TiO2 for Creating Self-Cleaning Property on the Glass. INTERNATIONAL JOURNAL of RENEWABLE ENERGY RESEARCH, 6 (4). http://eprints.utp.edu.my/12284/
institution Universiti Teknologi Petronas
building UTP Resource Centre
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Teknologi Petronas
content_source UTP Institutional Repository
url_provider http://eprints.utp.edu.my/
topic TJ Mechanical engineering and machinery
spellingShingle TJ Mechanical engineering and machinery
khalaji assadi, morteza
Fabrication of SWCNT/TiO2 for Creating Self-Cleaning Property on the Glass
description The significance of this research is to fabricate a Single Wall Carbon Nanotubes/ Titanium dioxide (SWCNT/TiO2) composite to be coated on glass which has the self-cleaning property. It has been observed that the surface of the glass tends to get dirty and dusty with time. The objectives of this paper are to compare and analyze the transmittance and also the photocatalytic activity of the nanocomposite solutions prepared. The method used to fabricate this composite is sol-gel synthesis as it has a higher amount of dispersion and is the easiest way to use and the method used to coat the solution on substrate is spin coating method since it has a uniform coating compared to other methods. It is important to ensure that the solution prepared is transparent so as to ease the coating process. 20 different samples were fabricated using different amount of SWCNT and TiO2 composition. In order to analyze transparency and photocatalytic activity, two different characterizations were conducted namely Fourier Transform Infrared Radiation spectroscopy (FTIR) for transmittance and Ultraviolet Visible absorption spectroscopy (UV-vis) for Methylene Blue (MB) concentration photodegradation. The highest transmittance obtained were (a) 10ml of TiO2, 0.04g SWCNT which was 82.2% and (b) 10ml of TiO2, 0.06g SWCNT which was 73.2% of transmittance. Also, the lowest concentrations achieved by MB are (a) 10ml of TiO2, 0.06g SWCNT which was 2.48mg/L and (b) 7.5ml TiO2, 0.02g SWCNT which was 3.1mg/L. By comparing the transmittance and photocatalytic activity, the highest efficiency obtained were (a) 10ml TiO2, 0.06g SWCNT which was 64.6% and also (b) 7.5ml TiO2, 0.04g SWCNT which was 56.3%.
format Article
author khalaji assadi, morteza
author_facet khalaji assadi, morteza
author_sort khalaji assadi, morteza
title Fabrication of SWCNT/TiO2 for Creating Self-Cleaning Property on the Glass
title_short Fabrication of SWCNT/TiO2 for Creating Self-Cleaning Property on the Glass
title_full Fabrication of SWCNT/TiO2 for Creating Self-Cleaning Property on the Glass
title_fullStr Fabrication of SWCNT/TiO2 for Creating Self-Cleaning Property on the Glass
title_full_unstemmed Fabrication of SWCNT/TiO2 for Creating Self-Cleaning Property on the Glass
title_sort fabrication of swcnt/tio2 for creating self-cleaning property on the glass
publishDate 2016
url http://eprints.utp.edu.my/12284/1/Fabrication%20of%20SWCNT-TiO2%20for%20Creating%20Self-Cleaning%20Property%20on%20the%20Glass.pdf
http://eprints.utp.edu.my/12284/
_version_ 1738656031645368320