Optimization of Preparation Conditions of Sewage sludge based Activated Carbon
The volume of sludge is a growing problem worldwide due to the increase in the population and the growing in industry and agriculture. Therefore, sludge management and disposal are becoming problematic and required more intensive and creative efforts. The objective of this study was to produce activ...
Saved in:
| Main Authors: | , , , , , , , , |
|---|---|
| Format: | Article |
| Published: |
Ain Shams University
2021
|
| Online Access: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-85095585402&doi=10.1016%2fj.asej.2020.07.026&partnerID=40&md5=a73f95cdc0a0ef5e7d8c733074f45062 http://eprints.utp.edu.my/23710/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Teknologi Petronas |
| Summary: | The volume of sludge is a growing problem worldwide due to the increase in the population and the growing in industry and agriculture. Therefore, sludge management and disposal are becoming problematic and required more intensive and creative efforts. The objective of this study was to produce activated carbon using sewage sludge as raw material. Preparation conditions of sewage sludge based activated carbon were optimized by applying Box-Behnken Design (BBD) in response surface methodology (RSM). Optimization process investigated the impact of interaction between chemical activation ratio, contact time and activation temperature on the surface area of activated carbon. A series of activated carbons were chemically activated using potassium hydroxide (KOH) and physically activated by pyrolysis process in tube furnace. The response of optimization process was the surface area of activated carbon which was depicted by the second-order polynomial regression model created by ANOVA. Optimum activated carbon characterizations were conducted by surface area (BET), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and Thermogravimetric analysis TGA. The maximum surface area of 377.7 m2/g was achieved at chemical activation ratio of 1, activation contact time of 3 hours and activation temperature of 500 �. According statistical analysis, the most significant parameter was the contact time, followed by chemical activation ratio and activation temperature. © 2020 THE AUTHORS |
|---|