A study on slug induced stresses using file-based coupling technique

Cyclic stresses imposed on the piping system are the potential cause of severe fatigue damage and failure. These stresses are induced due to pressure fluctuations which occurred as result of the slug flow motion inside the pipe. In this study, a coupled Fluid-Structure Interaction approach based on...

全面介紹

Saved in:
書目詳細資料
Main Authors: Mohmmed, A.O., Nasif, M.S., Al-Kayiem, H.H.
格式: Article
出版: Asian Research Publishing Network 2016
在線閱讀:https://www.scopus.com/inward/record.uri?eid=2-s2.0-85009212062&partnerID=40&md5=eb9a803371225089acaea9b01aae60a4
http://eprints.utp.edu.my/25321/
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
實物特徵
總結:Cyclic stresses imposed on the piping system are the potential cause of severe fatigue damage and failure. These stresses are induced due to pressure fluctuations which occurred as result of the slug flow motion inside the pipe. In this study, a coupled Fluid-Structure Interaction approach based on file coupling technique between the CFD code for the flow domain and the Finite Element Analysis code for the structure domain was utilized to address the induced stresses on the structural pipe. Three cases of air-water have been investigated and the CFD results reveal that the slug frequency and slug velocity increased with increasing the water velocity while the slug length decreased with increasing the water velocity. On the other hand, the maximum principal stresses increased by 10.2 and 23.7 when the slug velocity increased from 2.26 m/s to 3.39 m/s respectively. © 2006-2016 Asian Research Publishing Network (ARPN). All rights reserved.