An experimental study on the behaviour of glass filled polypropylene and polyethylene composite pipes under quasi-static axial loading

The behaviour of extruded glass fibre reinforced thermoplastic pipes under axial crushing load was investigated experimentally. It was envisaged that the difference between the axial and hoop moduli and strengths as well as the volume fraction would influence the mode of collapses and energy absorpt...

Full description

Saved in:
Bibliographic Details
Main Authors: Ya, H.H., El-Sobky, H.
Format: Article
Published: Penerbit UTM Press 2015
Online Access:https://www.scopus.com/inward/record.uri?eid=2-s2.0-84932630299&doi=10.11113%2fjt.v74.4841&partnerID=40&md5=b88ad6f5953f4aa2dc75c1681963fe89
http://eprints.utp.edu.my/31405/
Tags: Add Tag
No Tags, Be the first to tag this record!
Institution: Universiti Teknologi Petronas
id my.utp.eprints.31405
record_format eprints
spelling my.utp.eprints.314052022-03-26T03:18:58Z An experimental study on the behaviour of glass filled polypropylene and polyethylene composite pipes under quasi-static axial loading Ya, H.H. El-Sobky, H. The behaviour of extruded glass fibre reinforced thermoplastic pipes under axial crushing load was investigated experimentally. It was envisaged that the difference between the axial and hoop moduli and strengths as well as the volume fraction would influence the mode of collapses and energy absorption. The moduli could be varied using a new extrusion technology, which controls the fibre orientation pattern, hence, the mechanical properties. The ability to vary the moduli and the fibre volume fraction provides means of controlling the collapse mode in order to optimize specific energy absorption. Axial compression tests were performed on glass filled Polypropylene (GPP) and glass filled Polyethylene (GPE) composite pipes. The samples were chosen with a variety of fibre volume fraction (Vf = 5 to 20 and average angle of orientation θ= 50o to 80o) to evaluate the effect of anisotropy and Vf to the collapse modes when subjected to axial static loading. The results from the experiments revealed that typical axial and hoop modulus (Ea and Eθ ) of GPP and GPE pipes increased with increasing of θ from 55º to 75º and decreased gradually in between 75º to 80º. The axial modulus was increased constantly with the increase of Vf from 5 to 20 . However, the hoop modulus is the highest at 5 Vf, decreases significantly at 10, and gradually increases at 20. It is noticed that, the GPP and GPE pipes contain higher Vf and θ, collapsed in brittle failure mode (fragmentation), whereas those with less Vf and θ angle, collapsed in non-axis-symmetric (diamond) mode with the local fracture while the local fracture disappeared with lower fibre contents. © 2015 Penerbit UTM Press. All rights reserved. Penerbit UTM Press 2015 Article NonPeerReviewed https://www.scopus.com/inward/record.uri?eid=2-s2.0-84932630299&doi=10.11113%2fjt.v74.4841&partnerID=40&md5=b88ad6f5953f4aa2dc75c1681963fe89 Ya, H.H. and El-Sobky, H. (2015) An experimental study on the behaviour of glass filled polypropylene and polyethylene composite pipes under quasi-static axial loading. Jurnal Teknologi, 74 (10). pp. 111-119. http://eprints.utp.edu.my/31405/
institution Universiti Teknologi Petronas
building UTP Resource Centre
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Teknologi Petronas
content_source UTP Institutional Repository
url_provider http://eprints.utp.edu.my/
description The behaviour of extruded glass fibre reinforced thermoplastic pipes under axial crushing load was investigated experimentally. It was envisaged that the difference between the axial and hoop moduli and strengths as well as the volume fraction would influence the mode of collapses and energy absorption. The moduli could be varied using a new extrusion technology, which controls the fibre orientation pattern, hence, the mechanical properties. The ability to vary the moduli and the fibre volume fraction provides means of controlling the collapse mode in order to optimize specific energy absorption. Axial compression tests were performed on glass filled Polypropylene (GPP) and glass filled Polyethylene (GPE) composite pipes. The samples were chosen with a variety of fibre volume fraction (Vf = 5 to 20 and average angle of orientation θ= 50o to 80o) to evaluate the effect of anisotropy and Vf to the collapse modes when subjected to axial static loading. The results from the experiments revealed that typical axial and hoop modulus (Ea and Eθ ) of GPP and GPE pipes increased with increasing of θ from 55º to 75º and decreased gradually in between 75º to 80º. The axial modulus was increased constantly with the increase of Vf from 5 to 20 . However, the hoop modulus is the highest at 5 Vf, decreases significantly at 10, and gradually increases at 20. It is noticed that, the GPP and GPE pipes contain higher Vf and θ, collapsed in brittle failure mode (fragmentation), whereas those with less Vf and θ angle, collapsed in non-axis-symmetric (diamond) mode with the local fracture while the local fracture disappeared with lower fibre contents. © 2015 Penerbit UTM Press. All rights reserved.
format Article
author Ya, H.H.
El-Sobky, H.
spellingShingle Ya, H.H.
El-Sobky, H.
An experimental study on the behaviour of glass filled polypropylene and polyethylene composite pipes under quasi-static axial loading
author_facet Ya, H.H.
El-Sobky, H.
author_sort Ya, H.H.
title An experimental study on the behaviour of glass filled polypropylene and polyethylene composite pipes under quasi-static axial loading
title_short An experimental study on the behaviour of glass filled polypropylene and polyethylene composite pipes under quasi-static axial loading
title_full An experimental study on the behaviour of glass filled polypropylene and polyethylene composite pipes under quasi-static axial loading
title_fullStr An experimental study on the behaviour of glass filled polypropylene and polyethylene composite pipes under quasi-static axial loading
title_full_unstemmed An experimental study on the behaviour of glass filled polypropylene and polyethylene composite pipes under quasi-static axial loading
title_sort experimental study on the behaviour of glass filled polypropylene and polyethylene composite pipes under quasi-static axial loading
publisher Penerbit UTM Press
publishDate 2015
url https://www.scopus.com/inward/record.uri?eid=2-s2.0-84932630299&doi=10.11113%2fjt.v74.4841&partnerID=40&md5=b88ad6f5953f4aa2dc75c1681963fe89
http://eprints.utp.edu.my/31405/
_version_ 1738657243056832512