Optimization and analysis of nickel adsorption on microwave irradiated rice husk using response surface methodology (RSM)

• Main Authors: M.G., Pillai, I., Regupathi, M.H., Kalavathy, T., Murugesan, L.R., Miranda
• Format: Citation Index Journal
• Published: 2009
• Subjects: TP Chemical technology
• Online Access: http://eprints.utp.edu.my/571/1/paper.pdf; http://www.scopus.com/inward/record.url?eid=2-s2.0-66149116418&partnerID=40&md5=bb12c082936485199cf351736e64643d; http://eprints.utp.edu.my/571/
• Institution: Universiti Teknologi Petronas

Background: The removal of heavy metals using adsorption techniques with low cost biosorbents is being extensively investigated. The improved adsorption is essentially due to the pores present in the adsorbent. One way of improving the porosity of the material is by irradiation of the precursor using microwaves. In the present study, the adsorption characteristics of nickel onto microwave-irradiated rice husks were studied and the process variables were optimized through response surface methodology (RSM). Result: The adsorption of nickel onto microwave-irradiated rice husk (MIRH) was found to be better than that of the raw rice husk (RRH). The kinetics of the adsorption of Ni(II) from aqueous solution onto MIRH was found to follow a pseudo-second-order model. Thermodynamic parameters such as standard Gibbs free energy (ΔG°), standard enthalpy (ΔH°), and standard entropy (ΔS°)were also evaluated. The thermodynamics of Ni(II) adsorption onto MIRH indicates that it is spontaneous and endothermic in nature. The response surface methodology (RSM) was employed to optimize the design parameters for the present process. Conclusion: Microwave-irradiated rice husk was found to be a suitable adsorbent for the removal of nickel(II) ions from aqueous solutions. The adsorption capacity of the rice husk was found to be 1.17 mg g-1. The optimized parameters for the current process were found as follows: adsorbent loading 2.8 g (100 mL)-1; Initial adsorbate concentration 6 mg L-1; adsorption time 210 min.; and adsorption temperature 35°C. © 2008 Society of Chemical Industry.