Polyacrylate polymer assisted crystallization: Improved charge transport and performance consistency for solution-processable small-molecule semiconductor based organic thin film transistors
In this study, we report an effective approach to modulate crystallization, control charge transport and enhance performance consistency of small-molecule semiconductor based organic thin film transistors (OTFTs) with the addition of a polyacrylate polymer additive poly(2-ethylhexyl acrylate) (P2EHA...
Saved in:
Main Authors: | , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Elsevier
2019
|
Subjects: | |
Online Access: | http://repository.vnu.edu.vn/handle/VNU_123/67899 https://doi.org/10.1016/j.jsamd.2019.02.004 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Institution: | Vietnam National University, Hanoi |
Language: | English |
Summary: | In this study, we report an effective approach to modulate crystallization, control charge transport and enhance performance consistency of small-molecule semiconductor based organic thin film transistors (OTFTs) with the addition of a polyacrylate polymer additive poly(2-ethylhexyl acrylate) (P2EHA). 6,13- bis(triisopropylsilylethynyl) pentacene (TIPS pentacene) was used as a benchmark semiconductor to
blend with the P2EHA additive, leading to a vertical phase separation between these two components. The resultant TIPS pentacene film exhibited greatly reduced crystal misorientation, enlarged grain width and enhanced film coverage. Bottom-gate, bottom-contact OTFTs based on the TIPS pentacene/P2EHA blends were fabricated and showed an increased average hole mobility of 0.317 ± 0.047 cm2/V, as well as a performance consistency factor of 6.72, which is defined as the ratio of the average hole mobility to the standard deviation of mobility. Notably, it leads to a 10-fold and 7-fold enhancement of average mobility and performance consistency as compared to the pristine TIPS pentacene OTFTs. This great improvement of device performance can be attributed to the reduced crystal misorientation, less defects and trap centers at the grain boundaries as a result of the enlarged grain width, as well as increased film coverage, due to the addition of the P2EHA polyacrylate polymer additive |
---|