Altering substrate properties of thin film nanocomposite membrane by Al2O3 nanoparticles for engineered osmosis process

• Main Authors: Liew, Z.-S., Ho, Y.-C., Lau, W.J., Nordin, N.A.H.M., Lai, S.-O., Ma, J.
• Format: Article
• Published: 2022
• Online Access: http://scholars.utp.edu.my/id/eprint/33929/; https://www.scopus.com/inward/record.uri?eid=2-s2.0-85141592838&doi=10.1080%2f09593330.2022.2137435&partnerID=40&md5=12237d7f1288c6457b2e96cf8c5731d0
• Institution: Universiti Teknologi Petronas

The scarcity of energy and water resources is a major challenge for humanity in the twenty-first century. Engineered osmosis (EO) technologies are extensively researched as a means of producing sustainable water and energy. This study focuses on the modification of substrate properties of thin film nanocomposite (TFN) membrane using aluminium oxide (Al2O3) nanoparticles and further evaluates the performance of resultant membranes for EO process. Different Al2O3 loading ranging from zero to 0.10 wt was incorporated into the substrate and the results showed that the hydrophilicity of substrate was increased with contact angle reduced from 74.81° to 66.17° upon the Al2O3 incorporation. Furthermore, the addition of Al2O3 resulted in the formation of larger porous structure on the bottom part of substrate which reduced water transport resistance. Using the substrate modified by 0.02 wt Al2O3, we could produce the TFN membrane that exhibited the highest water permeability (1.32 L/m2.h.bar, DI water as a feed solution at 15 bar), decent salt rejection (96.89), low structural parameter (532.44 μm) and relatively good pressure withstandability (>25 bar). © 2022 Informa UK Limited, trading as Taylor & Francis Group.