The Use of Marine Sand in Bituminous Mix•

• Main Author: Sebi @ Hasbi, Hasmi Saifuddin
• Format: Final Year Project
• Language: English
• Published: Universiti Teknologi Petronas 2008
• Subjects: TA Engineering (General). Civil engineering (General)
• Online Access: http://utpedia.utp.edu.my/id/eprint/8229/1/2008%20Bachelor%20-%20The%20Use%20Of%20Marine%20Sand%20In%20Bituminous%20Mixer.pdf; http://utpedia.utp.edu.my/id/eprint/8229/
• Institution: Universiti Teknologi Petronas

Over the past decade, dramatic increasing in truck traffic, heavier axle loads, various environmental impacts and higher tire pressure had contributed to severe pavement distortions. In Malaysia, permanent deformation (creep deformation) is a continuously pavement distortion problems which caused by effect of temperature, successive stresses, excessive high bitumen content from improper mix design and insufficient compaction during roadway construction. In bituminous mix, fine aggregate's recent trend is using mining sand. Comparison in term of performance towards creep deformation between marine sand and mining sand as fine aggregate are key purpose for the study. For experiments, aggregate gradation are done for coarse aggregate; granite, fine aggregate; marine sand and mining sand as "well as filler; ordinary Portland cement. It is to determine the percentages of material used for making Marshall Mix sample. After conducting Marshall Mix design, stability tests is conducted upon each of sample to determine the optimum bitumen content by plotting graph of stability, density and void in mineral aggregate versus binder content. Dynamic creep test is performed to compare the performance of both samples. The result revealed that marine sand reaching stages of failures is twice as much compared with mining sand. It proves that usage of marine sand in bituminous mix increased its resistance towards permanent deformation (creep deformation).